MPPS not reading full 1mb flash

Pages: [1]

« previous next »

Author

Topic: MPPS not reading full 1mb flash (Read 5852 times)

dave926

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 36

	MPPS not reading full 1mb flash « on: October 12, 2014, 01:42:32 PM »

Back story:

Bought an ECU from eBay. Finally got all the stuff for a bench setup. Tried Galletto but couldn't connect so I hooked up my MPPS.

Read the full 1mb file no problem. Put the ecu in boot mode (I think) and flashed a basic stage 1 file but not under ' Generic '.

Tried to read out the file and match it with Winols to ensure success but the only thing coming out is around 320kb.

What am I missing?


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: MPPS not reading full 1mb flash « Reply #1 on: October 12, 2014, 06:22:06 PM »

Is the file NOREAD? Is MPPS real or clone?


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

MIL_on

Full Member

Karma: +12/-2
Offline

Offline

Posts: 119

	Re: MPPS not reading full 1mb flash « Reply #2 on: October 13, 2014, 12:37:40 AM »

flash it again in Bootmode using the generic Setup and then read back via obd to test it
btw. which ECU is it?


	Logged

dave926

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 36

	Re: MPPS not reading full 1mb flash « Reply #3 on: October 13, 2014, 03:33:06 AM »

Clone of course. Maybe some day I will buy a real MPPS if this ever turns into something besides just screwing around.

The ecu is 06a906032hs 00008, I flashed an hs 00007 to it.

I realized the reason why I couldnt get Galletto to work is because the ecu does not see the drivers for it. I changed the cable correctly too with Mprog.


	Logged

TCSTigersClaw

Sr. Member

Karma: +15/-6
Offline

Offline

Posts: 353

	Re: MPPS not reading full 1mb flash « Reply #4 on: October 13, 2014, 06:26:51 AM »

You flashed in boot ,but not under Generic ? what did you choose to flash it ?
Just flash it again in boot mode as MIL_ON said with your ORI file .
Then start over.

Original MPPS is a must ,it is not screwing around


	Logged

VAG cars newbie tuner

dave926

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 36

	Re: MPPS not reading full 1mb flash « Reply #5 on: October 13, 2014, 07:55:33 AM »

When I tried under Generic it went about 20% and stopped. Not sure if it's a clone issue or it not being in boot mode.


	Logged

dave926

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 36

	Re: MPPS not reading full 1mb flash « Reply #6 on: October 13, 2014, 09:23:56 AM »

Somewhat separate issue, but I changed the EPT on my blue cable and now it will not connect. Windows says the driver cannot be found

I have attached the ept that is currently on my cable.


	Logged

dave926

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 36

	Re: MPPS not reading full 1mb flash « Reply #7 on: October 17, 2014, 08:12:33 PM »

Update:

I powered up the ecu using normal pins and pin 121. Got bootmode with MPPS without issue after.

The file I was using before was based on an .bin output from Winols, started from this file http://nefariousmotorsports.com/forum/index.php?topic=4171.15. I think its corrupt as it only flashes a 330kb file but shows 1mb (can someone verify?)

Re-flashed the original file the ecu came with, and re read a 1mb file off it.

Flashed an SL file to it, and re read a 1mb file off it after.

Currently waiting for a new blue cable to arrive.......


« Last Edit: October 17, 2014, 08:23:32 PM by ddillenger »	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 06:17:55 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search