Hello out there,

at first sorry for my bad english I am German.

My car a VW Golf IV 1.8t GTI with AUM 06A906032DR

Informations from VCDS 12.12


I just get the Nefmotosoftware and connteced it with my VCDS cable.
And read the ECU Infos
see attachment.


what i want to do?

-disable 2. Lambda
-disable SAI
-disable error 17705 ( I get that error every coldstart discovered after remap)
-add antilag, launch control and no shift lift

Im new to that topic and i have a few questions

how do you called that function in english?
when you at 5000rpm and go off the throttle padl the fuel is cut(in German Schubabschaltung). and that i want to disable or set to higer rpm not standard at max. 1800rpm
which memory layout can I use for read EEPROM? better how i can i figur that out? i wont open my ecu. maybe its the same 06A906032HJ from AUQ AM29F800
where i can get the *.xdf file?

ok i find the .xdf file

here are my changes

added launchcontrol with launch.exe

10/24/2014 21:55:14  Scalar:    CDKAT changed from 1.00  (0x01) to 0.00  (0x00).       
10/24/2014 21:56:22  Scalar:    CDSLS changed from 1.00  (0x01) to 0.00  (0x00).         
10/24/2014 21:57:26  Scalar:    CDKAT changed from 1.00  (0x01) to 0.00  (0x00).
10/24/2014 21:58:11  Scalar:    CDSLS changed from 1.00  (0x01) to 0.00  (0x00).
10/24/2014 22:00:03  Scalar:    LKVDKNMN changed from 120.00  (0x78) to 38.00  (0x26).  here i dont know why it was at 120 after setting to 38 i still get the 17705 error

so i need a litte help


edit:
i just notice when i load a org. 003 and a org. 002 with that xdf. there to many differents
and launch control takes other offsets in 003 as 002.

so i need a xdf or a definitions file for winols. but where i can find one?

is here a how to copy maps from the tune in my 003 file to a 002 file? so i can use the xdf