misfire and o2 sensors

Pages: 1 [2]

« previous next »

Author

Topic: misfire and o2 sensors (Read 15443 times)

10101011

Full Member

Karma: +10/-13
Offline

Offline

Posts: 161

	Re: misfire and o2 sensors « Reply #15 on: February 19, 2015, 06:30:20 AM »

There is some thing wrong with bank 1. You have a timing problem with the belt or the chain or you have and ignition problem.

The misfire is causing the rich condition

- what is the plugs gapped to ?
- are the coils new from the dealer ?
- have the ignition modules been replaced ...swap them


	Logged

Poor quality lingers long after the price is forgotten ....

milanocito

Newbie

Karma: +0/-3
Offline

Offline

Posts: 16

	Re: misfire and o2 sensors « Reply #16 on: February 19, 2015, 11:35:35 AM »

new plugs instaleed beforee 2 days from audi i have them

original coils
i swapped evreything

i have camshaft impulsabile signal on bank 2 i think iti is the problem


	Logged

10101011

Full Member

Karma: +10/-13
Offline

Offline

Posts: 161

	Re: misfire and o2 sensors « Reply #17 on: February 19, 2015, 11:53:57 AM »

the cam sensor won't cause a misfire and a rich condition but the timing belt being off timing would cause a rich condition or lean condition and a misfire.


	Logged

Poor quality lingers long after the price is forgotten ....

milanocito

Newbie

Karma: +0/-3
Offline

Offline

Posts: 16

	Re: misfire and o2 sensors « Reply #18 on: February 19, 2015, 12:13:34 PM »

read this please

http://www.audizine.com/forum/showthread.php/632907-2-7t-misfire-on-bank1?p=10506991#post10506991


	Logged

10101011

Full Member

Karma: +10/-13
Offline

Offline

Posts: 161

	Re: misfire and o2 sensors « Reply #19 on: February 20, 2015, 05:06:12 AM »

You have a mechanical issue ! .


	Logged

Poor quality lingers long after the price is forgotten ....

10101011

Full Member

Karma: +10/-13
Offline

Offline

Posts: 161

	Re: misfire and o2 sensors « Reply #20 on: February 23, 2015, 03:30:09 PM »

Just like i said before ...... You had a mechanical problem and you did not want to listen to the advice Roll Eyes

I just read on Audizine you found the problem and it was the cam shaft being off time..... Shocked

wow

. Can you please post the details on the repair for other to read in the future.

Lee


	Logged

Poor quality lingers long after the price is forgotten ....

milanocito

Newbie

Karma: +0/-3
Offline

Offline

Posts: 16

	Re: misfire and o2 sensors « Reply #21 on: March 05, 2015, 09:33:43 AM »

i rezolved the problem the camshaft jumped in both banks


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 03:50:58 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search