NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Argdub ME7 95040 tool. problem to boot proram in Win XP and Win 8!?
Pages: [1]
« previous next »
Author Topic: Argdub ME7 95040 tool. problem to boot proram in Win XP and Win 8!?  (Read 7489 times)
Iceman160785
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
 Hello!:)

Hope some of you guys have time to help me out with a little problem! Smiley  I  have problem  with starting/booting  Argdubs Me7 tool  in windows.  have tryed to diffrent computers with win xp and win 8. but same problem on both.Sad 

 The  program  starts and i can see the dos/startup screen in 3sec  before it stops and disapers.?  i have tryed  to run  it in win  xp and 7 compability witouth luck.

You guys have any recomandations for me? Smiley Thanks!
« Last Edit: November 25, 2014, 11:57:57 AM by Iceman160785 » Logged
turboat
Moderator
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619
« Reply #1 on: November 25, 2014, 12:22:27 PM »
You need to run command line tools from the cmd, not from explorer. Take a look at this guide:

http://www.computerhope.com/issues/chusedos.htm
Logged
Iceman160785
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #2 on: November 25, 2014, 01:31:35 PM »
Quote from: turboat on November 25, 2014, 12:22:27 PM
You need to run command line tools from the cmd, not from explorer. Take a look at this guide:

http://www.computerhope.com/issues/chusedos.htm


THanks!:) really apprecicate the help!

I have now found the  program in dos. Smiley  but what comand to use for eks. set com port?  i use com port3. Smiley Ori ross-tech HEX+CAN  cable in  dumb mode.
Logged
turboat
Moderator
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619
« Reply #3 on: November 25, 2014, 02:39:13 PM »
You need to make sure you use the rosstech vcp drivers, not the standard rosstech drivers.
Logged
Iceman160785
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #4 on: November 28, 2014, 04:22:38 PM »
Quote from: turboat on November 25, 2014, 02:39:13 PM
You need to make sure you use the rosstech vcp drivers, not the standard rosstech drivers.



OK thanks!
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #5 on: November 28, 2014, 04:37:39 PM »
For the record, neither of my hex-can cables work with anything com-port specific, and I have the VCP drivers.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
turboat
Moderator
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619
« Reply #6 on: November 28, 2014, 04:49:24 PM »
Likewise, but I put that down to me not really caring enough to make it work, when there are kkl leads around.
Logged
Iceman160785
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #7 on: November 28, 2014, 07:43:42 PM »
Hi.

Tested little more tonight. Think  i understand   how this  works in cmd now. Roll Eyes Grin hehe..   Tested  with  both original ross-tech  HEX-USB+CAN cable  in dumb mode and a GAlletto 1260 cable.   Comport OK  it says.  but with both  cabels   i got a error code saying: Initating communication FAILURE ( =0X07)

Some of you guys have any advise  for this? Huh  

Thanks!

Have a Nice Weekend!
Logged
turboat
Moderator
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619
« Reply #8 on: November 29, 2014, 03:52:17 AM »
Unplug the cable, plug it back in, try again. I get that occasionally with my kkl lead.
Logged
ktm733
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 660
« Reply #9 on: December 01, 2014, 10:39:56 PM »
I got the same message but I ran it in boot mode. After holding the boot pin a little longer it worked. Also i did it with galleto cable.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 14, 2024, 06:31:26 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)