Pages: [1]
Author Topic: Moates Roadrunner Emulator  (Read 10886 times)
MIL_on
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 119


« on: November 27, 2014, 01:41:28 PM »

Selling my Roadrunner Package, which contains:
-Roadrunner PCB
-Byteswap Board
-4 Headers to solder on the ECU instead flash
-sealed plug-set to get outside the ecu
-USB Cable

purchased april 2014 directly from Moates for 625 US-$. Invoice comes with it. Customs charged me additional 85€.
Used it 3-4 times to set up some individual tunes. works flawless.

I can add a ECU (ME7.5 1.8t, 1mb) with already soldered header in it. Also two lids available: one welded, another glued to make the board fit in. The welded one has the plug on the upper side and the glued one on the side for different chassis versions.

unnecessary to explain anything about the function, i guess?

Price: Roadrunner + accessories 400€ + shipping (worldwide)
Additional ECU: 150€

Location: Germany
« Last Edit: November 27, 2014, 01:47:40 PM by MIL_on » Logged
MIL_on
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 119


« Reply #1 on: December 01, 2014, 12:40:24 AM »

price update: 500€ incl. ecu!
Logged
Frankenstein86
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #2 on: February 16, 2015, 12:00:39 AM »

Hi is it still available?
Logged
MIL_on
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 119


« Reply #3 on: February 16, 2015, 03:32:16 AM »

nope, sorry. Didnt want to sell it for ridiculous offers, so i decided to keep it besides the ols300 and it was the best decision Wink
regards
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #4 on: February 16, 2015, 11:33:52 AM »

Sorry for the off topic question, but can you use this with Tunerpro only, and have map tracing? Thanks.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
MIL_on
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 119


« Reply #5 on: February 17, 2015, 03:57:57 AM »

tracing doesnt work atm. neither with tunerpro nor winols.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #6 on: February 17, 2015, 12:38:59 PM »

Another question..So I assume you would have VCDS running via OBD to figure out the load points/real rpm (gauges are usually off) in realtime while changing values with the setup you have listed? This would be for steady state tuning on a dyno.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
prj
Hero Member
*****

Karma: +915/-426
Offline Offline

Posts: 5836


« Reply #7 on: February 17, 2015, 12:57:54 PM »

If you use VCDS you're already doing it wrong.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #8 on: February 17, 2015, 01:44:08 PM »

Sorry, I meant to say ME7logger.  Smiley
« Last Edit: April 04, 2015, 04:56:13 PM by vwaudiguy » Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
misiozol
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #9 on: September 13, 2015, 06:59:54 AM »

Selling my Roadrunner Package, which contains:
-Roadrunner PCB
-Byteswap Board
-4 Headers to solder on the ECU instead flash
-sealed plug-set to get outside the ecu
-USB Cable

purchased april 2014 directly from Moates for 625 US-$. Invoice comes with it. Customs charged me additional 85€.
Used it 3-4 times to set up some individual tunes. works flawless.

I can add a ECU (ME7.5 1.8t, 1mb) with already soldered header in it. Also two lids available: one welded, another glued to make the board fit in. The welded one has the plug on the upper side and the glued one on the side for different chassis versions.

unnecessary to explain anything about the function, i guess?

Price: Roadrunner + accessories 400€ + shipping (worldwide)
Additional ECU: 150€

Location: Germany

Hi is it still for sale ? have no interest in ecu just roadrunner set live in ireland 
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0s, 0q)