NefMoto > Technical > Flashing and Chipping > SIMOS CONTINENTAL 10.20 CMD FILE BY GALLETTO?
Pages: [1]
« previous next »
Author Topic: SIMOS CONTINENTAL 10.20 CMD FILE BY GALLETTO?  (Read 4486 times)
Rocky
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 24
« on: November 30, 2014, 04:24:17 AM »
HI

This simos 10.20 cannot be read even by CMD. There is only reading soft info and hole dump have to be downloaded from database ex. CMD database.

Have u experience if there is posibility to write CMD file by fgtech GALLETTO? Is there any chances, differences in those interfaces in writing?

thanks
Logged
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Online Online

Posts: 353
« Reply #1 on: December 08, 2014, 02:58:24 AM »
If you are talking about clone galletto , forget Simos 10.2X for a moment....it will flash or brick 50-50 ,just dont do it.
Logged
VAG cars newbie tuner Smiley
MaDwArLoCk
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 6
« Reply #2 on: April 22, 2018, 12:40:47 PM »
Quote from: Rocky on November 30, 2014, 04:24:17 AM
HI

This simos 10.20 cannot be read even by CMD. There is only reading soft info and hole dump have to be downloaded from database ex. CMD database.

Have u experience if there is posibility to write CMD file by fgtech GALLETTO? Is there any chances, differences in those interfaces in writing?

thanks

Hi Rocky,

How did you solve your problem with Simos 10.20?
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • April 24, 2024, 05:06:55 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)