flashing different ecus bench mode.

Pages: [1]

« previous next »

Author

Topic: flashing different ecus bench mode. (Read 4340 times)

ktm733

Hero Member

Karma: +18/-8
Offline

Offline

Posts: 660

	flashing different ecus bench mode. « on: December 02, 2014, 01:35:14 PM »

So I made a bench harness for me7.5 but i was wondering how do you do a read on other ecus for example I want to flash a 98 b5 1.8t and the ecu isn't a me7. How to i read this ecu? People say mpps will work but I need confirmation?


	Logged

ktm733

Hero Member

Karma: +18/-8
Offline

Offline

Posts: 660

	Re: flashing different ecus bench mode. « Reply #1 on: December 02, 2014, 01:48:37 PM »

Heres info on me3/5 but how do you find out if its a 3/5? Example i wanted to tune an 99 audi a6 with the 2.8l
4D0907551ah

http://www.audizine.com/forum/showthread.php/502302-me3-5-bench-flash-set-up


	Logged

k0mpresd

Hero Member

Karma: +146/-54
Offline

Offline

Posts: 1655

	Re: flashing different ecus bench mode. « Reply #2 on: December 02, 2014, 04:08:39 PM »

the solution for reading is to desolder and use a programmer. or if youre crafty there are other ways to dump it.
mpps will only write.
551ah is m5.92.


	Logged

ktm733

Hero Member

Karma: +18/-8
Offline

Offline

Posts: 660

	Re: flashing different ecus bench mode. « Reply #3 on: December 02, 2014, 05:56:59 PM »

What chip are we desoldering? Is that only on the m5.92 desoldering is needed?


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 14, 2024, 09:28:36 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search