Pages: [1]
Author Topic: 8D0907551AA XDF/OLS  (Read 5048 times)
rcoolb2001
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: December 03, 2014, 08:54:47 PM »

Hi guys I'm looking for a XDF for 8D0907551AA.  I have compared to a M-Box xdf and some of a scalars look correct, while other do not.  Most of the tables appear incorrect.

My main goal is to disable EGT, Rear02, SAI, and adjust fueling for exhaust.

The original file is attached.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: December 03, 2014, 09:04:53 PM »

Hi guys I'm looking for a XDF for 8D0907551AA.  I have compared to a M-Box xdf and some of a scalars look correct, while other do not.  Most of the tables appear incorrect.

My main goal is to disable EGT, Rear02, SAI, and adjust fueling for exhaust.

The original file is attached.

Flash 551L.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
rcoolb2001
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #2 on: December 03, 2014, 09:23:36 PM »

Thank you for the reply.  I was looking at doing that.  I did see that one L-box xdf file, but haven't loaded it up in tuner pro to compare.  Is the M-box definition close enough most people use that?
Logged
smelly240
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 102


« Reply #3 on: December 04, 2014, 07:42:39 AM »

Yes - the vanilla M box def should do L pretty good.
Logged
rcoolb2001
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #4 on: December 04, 2014, 05:17:44 PM »

Thanks guys!

Obviously some of the Auto-only stuff like the SAI stuff... is not in the M-box definition.  I found the MSLUB parameters over on vwvortex, discussed some by ddillenger, but the table fills with some pretty crazy numbers, and non-sequential column labels.

I am using a "original" 7551L bin that I found on nyet's page.

Utmost thanks already do you guys who have put in work on this stuff.  It is incredibly complex compared to the tuning I have done in the past!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)