NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > 022906032BM Immo off
Pages: [1]
« previous next »
Author Topic: 022906032BM Immo off  (Read 6560 times)
nobug
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20
« on: December 13, 2014, 09:50:37 PM »
I have managed to read the eeprom but haven't had much luck setting the immo off.
It is a 95P08 eeprom 1K in size, the 95040 tool changes the last 512 bytes so they are not all FF like they should be.
Me7 check gives me errors also.

If someone could turn the immo off it would be greatly appreciated.

This ecu has been a little frustrating to say the least but I am also learning more and more from it as I go.

Cheers
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #1 on: December 13, 2014, 10:18:54 PM »
Attached.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
nobug
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20
« Reply #2 on: December 13, 2014, 10:33:22 PM »
Quote from: ddillenger on December 13, 2014, 10:18:54 PM
Attached.


Thank You!
Very much appreciated....
Logged
nobug
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20
« Reply #3 on: December 14, 2014, 06:30:13 AM »
Quote from: ddillenger on December 13, 2014, 10:18:54 PM
Attached.

Did you use a tool for this or just change the two instances 01 to 02?
if so do those changes effect the checksum?

Learning as I go, the 95040,95320 and 24c04 etc haven't been hard but the 95P08 has been a bit of a challenge, we have a VW-Audi shop and do engine swaps etc. these forums have been a great help.
We have been waiting for close to a week for a company to do this immo delete. Last response was to send them the ecu. So I thought I would give it another try.
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #4 on: December 14, 2014, 06:40:50 AM »
Quote from: nobug on December 14, 2014, 06:30:13 AM
Did you use a tool for this or just change the two instances 01 to 02?
if so do those changes effect the checksum?

Learning as I go, the 95040,95320 and 24c04 etc haven't been hard but the 95P08 has been a bit of a challenge, we have a VW-Audi shop and do engine swaps etc. these forums have been a great help.
We have been waiting for close to a week for a company to do this immo delete. Last response was to send them the ecu. So I thought I would give it another try.

Look at the file. I did it manually, checksums are good.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
nobug
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20
« Reply #5 on: December 15, 2014, 01:29:55 PM »
Had to do another one today, was much easier the second time.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 18, 2024, 10:21:56 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)