Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Tuning
>
how can a tune have no problems when the MAF is removed ?
Pages: [
1
]
« previous
next »
Author
Topic: how can a tune have no problems when the MAF is removed ? (Read 5938 times)
10101011
Full Member
Karma: +10/-13
Offline
Posts: 161
how can a tune have no problems when the MAF is removed ?
« on: December 16, 2014, 01:12:06 PM »
I have a question about a R*vo tune on an 2003 Audi AWM 1.8t and how they tuned the ecu with a MAF but a lot of VW - Audi guys remove the MAF and the car still runs well. I have the car in my shop with out a MAF and the car is running perfect with a GT28 turbo I was told it is R*vo software. what do you think ? How did they do it ? I found this on another website ..... " On R*VO "BT" software you can either run MAF or MAFless. To run MAFless just unplug the MAF and it will automatically run MAFless "...
Lee
Logged
Poor quality lingers long after the price is forgotten ....
ddillenger
Hero Member
Karma: +641/-21
Offline
Posts: 5640
Re: how can a tune have no problems when the MAF is removed ?
« Reply #1 on: December 16, 2014, 01:44:14 PM »
It's a diagnosis hack that allows ESP/ABS to work. It's still not ideal, but wideband cars work FAIRLY well without the MAF.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!
Email/Google chat:
DDillenger84(at)gmail(dot)com
Email>PM
vwaudiguy
Hero Member
Karma: +53/-37
Offline
Posts: 2024
Re: how can a tune have no problems when the MAF is removed ?
« Reply #2 on: December 16, 2014, 01:47:47 PM »
Target AFR only on wideband ecu's. I believe the fact it runs "mafless" just means it won't set a DTC when the maf is unplugged. When you say "no problems" ....it isn't as accurate, or fast acting as tuning off the maf readings, and driveability may suffer some. Just my two cents. I hope someone with more experience chimes in.
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
terminator
Sr. Member
Karma: +15/-4
Offline
Posts: 425
Re: how can a tune have no problems when the MAF is removed ?
« Reply #3 on: December 17, 2014, 04:55:33 PM »
Quote from: ddillenger on December 16, 2014, 01:44:14 PM
It's a diagnosis hack that allows ESP/ABS to work. It's still not ideal, but wideband cars work FAIRLY well without the MAF.
And why its not ideal? And why some tuners prefer mafless with big turbos? I think RS4 MAF is ok up to 700-800hp.
Logged
fknbrkn
Hero Member
Karma: +186/-24
Offline
Posts: 1455
mk4 1.8T AUM
Re: how can a tune have no problems when the MAF is removed ?
« Reply #4 on: December 17, 2014, 05:05:58 PM »
Quote from: ddillenger on December 16, 2014, 01:44:14 PM
It's a diagnosis hack that allows ESP/ABS to work. It's still not ideal, but wideband cars work FAIRLY well without the MAF.
WTH?
what the hack
Logged
terminator
Sr. Member
Karma: +15/-4
Offline
Posts: 425
Re: how can a tune have no problems when the MAF is removed ?
« Reply #5 on: December 17, 2014, 05:36:05 PM »
I dont think its a free hack)
Logged
TCSTigersClaw
Sr. Member
Karma: +15/-6
Offline
Posts: 353
Re: how can a tune have no problems when the MAF is removed ?
« Reply #6 on: December 18, 2014, 12:37:22 AM »
As Daz said , Wideband Cars can run pretty well , on some occasions you won`t even tell the difference . It requires time and very good injectors calibration as well as the theoritical air flow maps .
I have never seen a REVO BT file to tell you the truth , only regular stage 1-2 files
Logged
VAG cars newbie tuner
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 26, 2024, 07:28:53 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...