Pages: [1]
Author Topic: How to read\flash the Audi A4 2003 1.8t BEX?  (Read 4050 times)
melodic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« on: December 23, 2014, 10:17:19 AM »

I`ve try to use MPPS, NefMoto Flasher, K+CAN Commander but can`t read the flash. MPPS can`t do Ecu Id.
Is it immo blocks flashing? How can I disable immo?
VCDS works well.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: December 23, 2014, 02:10:10 PM »

They are sometimes shitty to read. Write is usually no problem. Use nefmoto at 38400 baud. Post your ecu number and I will provide an original file.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
melodic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #2 on: December 24, 2014, 08:33:53 AM »

thanx. I did it on 38400  Grin by NefMoto Flasher.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)