Hello from Ontario Canada

Pages: [1]

« previous next »

Author

Topic: Hello from Ontario Canada (Read 6520 times)

B6T

Jr. Member

Karma: +0/-3
Offline

Offline

Posts: 27

	Hello from Ontario Canada « on: December 27, 2014, 05:58:47 AM »

Hey,
Mechanical Engineer from the Waterloo area in Ontario, Canada here. I've got a 2004 Audi A4 6-speed which I have swapped a BEL code 2.7tt from an '03 A6 tiptronic into. Engine is completely stock. Looking to learn about flash tuning this thing on my own.

Also own a '09 BMW 135i M-Sport 6-speed but no one cares about those. Cool


	Logged

thelastleroy

Sr. Member

Karma: +19/-2
Offline

Offline

Posts: 260

	Re: Hello from Ontario Canada « Reply #1 on: December 27, 2014, 06:36:07 AM »

Welcome, fellow Canuck! I'm down in sleepy Oakville if you ever need a hand. Still learning this all myself, but I've been able to bump up my 1.8t basically to the limit of the stock injectors. Cool that you did a 2.7t swap in a 04 6-speed. That's the same as my Avant. Love to see that sometime!


	Logged

B6T

Jr. Member

Karma: +0/-3
Offline

Offline

Posts: 27

	Re: Hello from Ontario Canada « Reply #2 on: December 27, 2014, 07:37:08 PM »

Sure, I might hit up a dyno in Oakville at some point in the future, once I have this all figured out. I'll send you a message before I head down.

Forgot to mention in my initial post that I have some experience tuning gained from an old RX-7 I had which was running on Electromotive TECIII standalone. I'm also reasonably good with wiring.


	Logged

Jonamond

Full Member

Karma: +0/-0
Offline

Offline

Posts: 82

	Re: Hello from Ontario Canada « Reply #3 on: January 07, 2015, 07:28:25 PM »

Hello from hamilton! Me and my buddy just got b6 a4's. We had tdis that we would tune ourselves. Now into the gas game, much different!


	Logged

thelastleroy

Sr. Member

Karma: +19/-2
Offline

Offline

Posts: 260

	Re: Re: Hello from Ontario Canada « Reply #4 on: January 07, 2015, 07:41:16 PM »

Quote from: Jonamond on January 07, 2015, 07:28:25 PM

Hello from hamilton! Me and my buddy just got b6 a4's. We had tdis that we would tune ourselves. Now into the gas game, much different!

1.8t?


	Logged

Jonamond

Full Member

Karma: +0/-0
Offline

Offline

Posts: 82

	Re: Hello from Ontario Canada « Reply #5 on: January 11, 2015, 11:19:50 PM »

yes, i am scratching my head so hard right now lol.

doing alot of reading, from what i understand to load the stg 1 tune onto my ecu is has to be 518ak? also put it into tunerpro trying to add antilag and nls... im lost Tongue

Hope to learn lots and have more confidence with this.


	Logged

thelastleroy

Sr. Member

Karma: +19/-2
Offline

Offline

Posts: 260

	Re: « Reply #6 on: January 12, 2015, 05:19:35 AM »

Start with successfully reading out your stock file. See the getting started guide


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 07:49:03 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search