NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Disable VVT on 2.7T M-box
Pages: [1]
« previous next »
Author Topic: Disable VVT on 2.7T M-box  (Read 8535 times)
metronet
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 73
« on: January 02, 2015, 12:24:07 PM »

Has anyone disabled/deleted the camshaft adjustment on the 2.7T M-box/L-box completely?

I have searched around and so far this is the closest answer I've found:
http://nefariousmotorsports.com/forum/index.php?topic=651.msg6145#msg6145

Is it just simply make everything 0 (instead of 1) in KFNW & KFNWWL and make KFZW2 = KFZW ?

Would this have any side effect like higher fuel consumption etc...?


Thanks for reading and Happy New Year!
Logged
flamy
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 56
« Reply #1 on: January 02, 2015, 11:48:46 PM »
Lower torque in lower revs.
Why do you want to delete the camshaft adjustment?
Logged
metronet
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 73
« Reply #2 on: January 03, 2015, 12:25:46 AM »
Quote from: flamy on January 02, 2015, 11:48:46 PM
Lower torque in lower revs.
Why do you want to delete the camshaft adjustment?

Right, the reason is my passenger side's solenoid is failing intermittently (ohm reading is out of spec) and wanted to experiment if I could live without VVT.

Lower torque is fine with me as long as it is as reliable Smiley
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #3 on: January 03, 2015, 09:30:01 AM »
Quote from: metronet on January 03, 2015, 12:25:46 AM
Right, the reason is my passenger side's solenoid is failing intermittently (ohm reading is out of spec) and wanted to experiment if I could live without VVT.

Lower torque is fine with me as long as it is as reliable Smiley




If the solenoid is failing, you will likely need ESKONF as well.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #4 on: January 03, 2015, 05:43:12 PM »
Quote from: metronet on January 03, 2015, 12:25:46 AM
Right, the reason is my passenger side's solenoid is failing intermittently (ohm reading is out of spec)

What fault code(s) are you getting?
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
metronet
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 73
« Reply #5 on: January 03, 2015, 07:51:06 PM »
Thanks for the help guys.

Quote from: vwaudiguy on January 03, 2015, 05:43:12 PM
What fault code(s) are you getting?

I noticed the following code when the engine started and stalled twice in a roll and thought it was odd (MIL not on):

Code:
1 Fault Found:
17927 - Camshaft Adjustment; Bank 1: Malfunction
        P1519 - 35-10 - - - Intermittent


I think it's failing only during heavy load. There is no code set when just driving around the city.

VCDS group 093 shows 0 and 4. Oh and the car is a 2001 Allroad Tip running stock L-box.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #6 on: January 03, 2015, 09:01:15 PM »
If it's just the solenoid, you could just swap out the metal canister portion of the VVT aasembly. It seems so abrupt based on that log, that could be it.
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #7 on: January 03, 2015, 09:02:30 PM »
Looks like the driver's side (bank2) is having the issue.

What does measuring block 093 read at idle?
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
metronet
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 73
« Reply #8 on: January 03, 2015, 10:03:20 PM »
Quote from: vwaudiguy on January 03, 2015, 09:01:15 PM
If it's just the solenoid, you could just swap out the metal canister portion of the VVT aasembly. It seems so abrupt based on that log, that could be it.

I'll try to swap out the solenoid, thank you.


Quote from: ddillenger on January 03, 2015, 09:02:30 PM
Looks like the driver's side (bank2) is having the issue.

What does measuring block 093 read at idle?

I did notice bank2 is never able to reach 22 degree and I always have a few misfires at cold start at cylinder #5 (me7logger thinks cylinder #4 for some reason).

Group 093 reads either 0, 4 at cold start or 1, 5 in closed loop. I have seen them as far as 5 (CF) apart, bank2 being the one that's always higher.

Do you think this can cause an issue at high load? Thanks.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #9 on: January 03, 2015, 10:59:08 PM »
Quote from: metronet on January 03, 2015, 10:03:20 PM
a few misfires at cold start at cylinder #5 (me7logger thinks cylinder #4 for some reason).

Ya... the cylinder number can't always be trusted!
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #10 on: January 04, 2015, 12:28:36 AM »
Quote from: nyet on January 03, 2015, 10:59:08 PM
Ya... the cylinder number can't always be trusted!

Truth. Seen it many times.
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
metronet
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 73
« Reply #11 on: January 05, 2015, 09:55:01 AM »
Another noob question... What about cdnws?

Does it turn off VVT if cdnws is set to 0, or that's strictly for diagnosis only? Thanks! Smiley
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #12 on: January 05, 2015, 10:15:35 AM »
Quote from: metronet on January 05, 2015, 09:55:01 AM
Another noob question... What about cdnws?

Does it turn off VVT if cdnws is set to 0, or that's strictly for diagnosis only? Thanks! Smiley

diagnosis only
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 22, 2024, 11:22:29 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)