Pages: [1]
Author Topic: XDF to .kp or a2l ?  (Read 7469 times)
msrundercober
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« on: January 07, 2015, 03:02:45 AM »

Hi,

is it possible to convert xdf files into .kp or a2l files to use them with winols ?

Greetz

D.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #1 on: January 07, 2015, 10:35:03 AM »

.kp will be very very hard to generate. EVC (in their infinite euro tuner style wisdom) decided to use a proprietary, non-portable, inconsistent binary only format. I doubt they will ever document it. I doubt it is even possible to document it.

a2l is possible, but would require a bit of work.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
msrundercober
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #2 on: January 07, 2015, 11:27:39 AM »

thx for your quick answer.

a2l would do it for me.

can you help me to get on the right path ?

Greetz

D.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #3 on: January 07, 2015, 12:54:28 PM »

the .xdf format is pretty self explanatory, its basically an xml file with a few obfuscated tags (which I can help you with if you run into problems)

You can load it with just about any xml parser.

The tricky part is outputting into a2l, which, unfortunately, I do not know that much about.

You'll have to find a2l syntax documentation.

I've been meaning to make an a2l generator but since the format isn't well known to me i haven't gotten around to it.

If you have COMPLETE a2l files (as a reference) you can upload them here and I can take a look.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)