Here's a read from my wife's stock A4 1.8T.

I had to split the original read with hxd because i was forced to use the 29F800BB layout. The 29F400 layout would not allow me to do a read at all. Is this normal?

Here is the me7check results:
=========================================================
me7check v1.08 (c) mki, 06/2004-04/2011
Checking file AUDI A4 1.8T ATW 150HP 4B0906018P.bin2 (size=524288)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 42/1/ME7.5/3/4012.00//F22id/Dst06g/250899/
-> Contents of ECUID data table:
   - '0261206537'         (SSECUHN)
   - '1037352750'         (SSECUSN)
   - '4B0906018P  '       (VAG part number)
   - '0006'               (VAG sw number)
   - '1.8L R4/5VT     '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'

-> No errors found. File is OK.   *********************

can someone please verify that this is a good file? im new at this haha.

sweet, thanks gremlin!