Pages: [1]
Author Topic: First time using TunerPro  (Read 3846 times)
TLS
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 62


« on: February 10, 2015, 01:05:47 AM »

So, I pulled the Bin from my car.
Got an XDF from here.
Loaded it in TunerPro.
Had a look at LDRXN.
It doesn't look right to me.
Does this suggest that the XDF won't suit?
I did a Compare and saw other LDRXNs that look like RPM progressions.

XDF was AA, Mine is AC, AR looks fine on Compare. AG looks like mine.

Logged
Beaviz
Full Member
***

Karma: +8/-4
Offline Offline

Posts: 190


« Reply #1 on: February 10, 2015, 01:48:36 AM »

The definition file definitely does not match yours.

LDRXN axis is RPM and output is load %.
Logged
TLS
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 62


« Reply #2 on: February 10, 2015, 03:38:25 AM »

Thanks Beavis. Looks like I'll pick up a spare ecu and flash over a bin that had a good Def.
Logged
TLS
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 62


« Reply #3 on: March 09, 2015, 05:54:00 AM »

Noob graduation (partial.)

Refer http://nefariousmotorsports.com/forum/index.php?topic=7849.0title= for my progress on the .XDF
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 16 queries. (Pretty URLs adds 0s, 0q)