NefMoto > ECU Files > ECU Definition Files > 07K ECU Definition
Pages: [1]
« previous next »
Author Topic: 07K ECU Definition  (Read 9852 times)
A4Rich
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 116
« on: February 28, 2015, 03:40:19 PM »
With the recent 07K B6/B7 swaps, I would like begin to define a bin.  Although at this point for me it is only fun/learning, but that may change.  I have targeted a 2006 ME7.1.1 ECU (Infineon, not ST10) hoping to use similar bins to define.

I have only started; will update this with new information as I go.

BIN:
ME7.1.1 Here
Code:
C:\ME7\ME7Logger_v1.23>me7check 07K906032AN 6738.bin
==============================================================================
me7check v1.12 (c) mki, 06/2004-05/2012
Checking file in.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = embedded in CPU, asume 06.02/06.05
-> EPK = 44/1/ME7.1.1/120/C1103F//24M/A1A06M5/190805/
-> Contents of ECUID data table:
   - '0261201290'         (SSECUHN)
   - '1037378537'         (SSECUSN)
   - '07K906032AN '       (VAG part number)
   - '6738'               (VAG sw number)
   - '2.5l R5/4V     '    (engine id)

-> No errors found. File is OK.   *********************
 

Read:
MPPS or galletto 1260 (to be confirmed)

Checksum:
ME7sum – not working
ECUfix – not supported

Flash:
Boot mode

Wiring Diagram:
Courtesy of zillarob Here

Motivation:
Courtesy  of mec from audizine
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #1 on: February 28, 2015, 03:52:15 PM »
Rich, ditch the ST10 ecu, get an earlier C167 model. 2006. It's the very best option.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
A4Rich
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 116
« Reply #2 on: March 01, 2015, 07:27:23 AM »
Quote from: ddillenger on February 28, 2015, 03:52:15 PM
Rich, ditch the ST10 ecu, get an earlier C167 model. 2006. It's the very best option.

Shoot, thanks DD thought I had found one based on the year.  How did you know (besides that your awesome Smiley) that the bin above was ST10?  Any way to know without opening ECU?
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #3 on: March 01, 2015, 07:58:18 AM »
Nevermind. Your ecu is a 2006, automatic. When you said no checksums, I assumed you had the bastard ST10 ecu!
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #4 on: March 01, 2015, 11:05:40 AM »
Quote from: A4Rich on March 01, 2015, 07:27:23 AM
Shoot, thanks DD thought I had found one based on the year.  How did you know (besides that your awesome Smiley) that the bin above was ST10?  Any way to know without opening ECU?

This? I know it's labeled on the processor, but which years have this ecu?
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #5 on: March 01, 2015, 11:08:38 AM »
2006 and early 2007 have the C167. Late 07-early 08 have ST10. 09+ has MED17.

I have worked with them all. The early ones are VERY much like the rest of ME7. The ST10 ecus are horrible.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #6 on: March 01, 2015, 11:11:30 AM »
So is it just the 4.2's and the 2.5's that have the ST-10 processor?
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
A4Rich
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 116
« Reply #7 on: March 01, 2015, 07:06:11 PM »
Quote from: ddillenger on March 01, 2015, 07:58:18 AM
Nevermind. Your ecu is a 2006, automatic. When you said no checksums, I assumed you had the bastard ST10 ecu!

Thanks DD.  Not the best candidate ecu but will start with this and look for an 07K 906 032 C out of a early manual beetle.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #8 on: March 01, 2015, 07:44:23 PM »
Quote from: vwaudiguy on March 01, 2015, 11:11:30 AM
So is it just the 4.2's and the 2.5's that have the ST-10 processor?

No, there are many more. Most notably the 3.2.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
B5Quattrolife
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 27
« Reply #9 on: October 11, 2018, 12:17:56 PM »
Anyone have any updates on this?  Also looking for .XDF for the ME7.1.1 07K bin
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2800
« Reply #10 on: October 11, 2018, 05:59:37 PM »
You may wanna look at my current posts. I recently posted a al2 exported ols. I'm sure some maps may have errors but it's a fully defined ols
Logged
Giving your mom a tuneup
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 07:45:13 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.033 seconds with 17 queries. (Pretty URLs adds 0s, 0q)