Pages: [1]
Author Topic: ECU reports that security access is not supported on 1.8t resolved  (Read 3546 times)
Jeriho
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3



So i have been trying to read a spare ecu for my s3 8l. Done the immo defeat and it still wouldnt read. Keept giving the "ECU reports that security access is not supported".
After searching for quite a while i found some sugestions that on 1.8t pin 121 has to have 12v. After trying that works perfectly. Just in case someone needs this.
Logged
turboat
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619


« Reply #1 on: March 14, 2015, 03:50:05 AM »

You're welcome  Wink

Glad you got it working! Must sticky the bench reading thread.
Logged
Jeriho
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #2 on: March 15, 2015, 07:53:48 AM »

Well thanks and dont mean to be arogant but i wouldnt know what for. The sugestion i found on VWVorteks i think. But might be worth ading it to the bench harnes sticky.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)