Pages: [1]
Author Topic: 2.0t FSI ECU Pinout  (Read 9689 times)
mec
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 12


« on: March 21, 2015, 05:56:38 PM »

Not sure if this is the correct section for this, but I am doing an engine swap in my 2.0t FSI B7 A4, and I've identified almost all of the 154 pins on the ECU, but I haven't been able to find where 6 wires go to.


Curious if anyone has a 2.0t ecu pinout, or if anyone has a better manual that might have pins:
56
57
58

78
79
80

There are the 6 pins that I can't figure out where they go to.

Thanks!

Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: March 21, 2015, 07:14:47 PM »

All of the pins referenced are for the DBW system. They go to the TPS. If you need the full diagrams, LMK.

56 TPS sensor pin 5 Grey/yellow
57 TPS sensor pin 6 Brown
58 TPS sensor pin 1 Brown/green

78 TPS sensor pin 3 Brown/red
79 TPS sensor pin 4 Yellow/blue
80 TPS sensor pin 2 Yellow/violet
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
mec
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 12


« Reply #2 on: March 25, 2015, 01:13:57 PM »

Right on, thanks! Hopefully I can finish this wiring now Smiley
Logged
Placebo
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 108


« Reply #3 on: July 30, 2016, 02:01:12 PM »

Doing some throttle body electrical trouble shooting on a bad ECU.  Looking for a good ECU pinout listing for a 2.0t FSI, MED 9.1.  LMK if you know where to look or if you have one to share.  Many thanks.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)