Pages: [1]
Author Topic: Help with Deff file for 4B0907551AK ECU SW0001  (Read 4993 times)
dzverko
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« on: April 06, 2015, 02:24:17 PM »

HELP!

I am looking for an XDF file for my ECU 4B0907551AK! 2002 Audi A6 6 spd


Here is the checksum check:

Reading Version Strings...
-> Bootrom Version = embedded in CPU, asume 05.12/05.32
-> EPK = 40/1/ME7.1/5/6005.02//22N/DstE1o/300401//
-> Contents of ECUID data table:
   - '0261207454'         (SSECUHN)
   - '1037362548'         (SSECUSN)
   - '4B0907551AK '       (VAG part number)
   - '0001'               (VAG sw number)
   - '2.7l V6/5VT     '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'


-> No errors found. File is OK.   *********************

I am a newbie with tuning but an experienced tech...


Should I look for the XDF file for my ECU or just cross flash with a "M-box"? Also I read that if I do cross flash I would have to pull the info from the immobilizer chip. I guess my question is, if I need to do that, would there be any issues starting if I use the '"M-box" flash...

Thanks in advance!




Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12268


WWW
« Reply #1 on: April 06, 2015, 02:30:38 PM »

Switch to S4 M box and call it a day
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
dzverko
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #2 on: April 06, 2015, 04:54:36 PM »

Switch to S4 M box and call it a day

Thank you for the reply! Any Walkthrough of how to do it? I searched, but could not find anything...
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12268


WWW
« Reply #3 on: April 06, 2015, 05:01:22 PM »

Should be 1:1 swap. You'll lose IMMO if you had it though.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
dzverko
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #4 on: April 06, 2015, 07:13:14 PM »

Should be 1:1 swap. You'll lose IMMO if you had it though.

So in other words just find the correct bin file and flash it on? Well check it with me7check first...
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)