2001 Audi B5S4 Stage 3 problem with passing emission test

Pages: [1]

« previous next »

Author

Topic: 2001 Audi B5S4 Stage 3 problem with passing emission test (Read 5670 times)

chris_bo

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	2001 Audi B5S4 Stage 3 problem with passing emission test « on: July 23, 2011, 07:40:46 PM »

Hello Everyone, I am new here but asking for a little bit of help with problem.
I've asked AudiWorld, Audizine forums and you are my last chance. I've heard you are really PRO. Here is story: I've built full stage 3 with Borg and Wagner turbos, Green Giant 42lbs injectors, 85 mm MAF, "gutted" pre-cats and stock catalytic converters, Neuspeed rear muffler with deleted resonator. I have my ECU flashed with Vast Performance Stage 3 version 2 from Jason.
I keep getting problems in readiness with Catalytic Converters "Failed or Incomplete".
Jason from Vast deleted in my tune rear O2 sensors and I keep getting this readiness faulty so I can't emission test.
What else can cause this problem ? I was thinking - should I just unplug 02's so ECU won't see them at all ?
Please help. I am willing to PayPal anybody who can resolve this problem by the end of July, when my emission test will die on me and then I'm screwed.
Thank you in advance.
Chris


	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: 2001 Audi B5S4 Stage 3 problem with passing emission test « Reply #1 on: July 23, 2011, 09:16:05 PM »

I would assume they didn't code them out completely (CDKAT). Have you tried to pull your bin with NefMoto? Most likely, you will need Galletto.


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: 2001 Audi B5S4 Stage 3 problem with passing emission test « Reply #2 on: July 24, 2011, 10:02:20 AM »

I'm surprised Vast didn't do this?


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

chris_bo

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: 2001 Audi B5S4 Stage 3 problem with passing emission test « Reply #3 on: July 24, 2011, 08:24:03 PM »

No, they didn't do that and I don't know what is going on right now Huh

What should I say to Jason ? They keep telling me: "your software is steal, so they shouldn't be any problems" ... Well they are... Roll Eyes


	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: 2001 Audi B5S4 Stage 3 problem with passing emission test « Reply #4 on: July 27, 2011, 08:01:28 AM »

I am not exactly sure what you mean in your last post, but the only way that we can help you is if you pull the bin file from your ECU. Try using the NefMoto software, and if that doesn't work then try using Galletto. It should just be a simple CW. Have you tried running the readiness procedures from the Ross-Tech wiki?


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 04:26:49 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search