Timing Oscillations

Pages: [1]

« previous next »

Author

Topic: Timing Oscillations (Read 4707 times)

Basano

Full Member

Karma: +90/-3
Offline

Offline

Posts: 192

	Timing Oscillations « on: April 12, 2015, 12:25:52 PM »

Since I am a noob at tuning, I’m a bit puzzled about this one.

Some kind of intervention?

Audi S3 8P MY2008
2.0 TFSI MED9.1
8P0907115H
387951

Hardware is completely stock, tune is pretty basic stage 1 that I’ve been putting together myself (with help from all of you thanks

)

I’ve logged some other variables as well for what it’s worth (assuming things are somewhat similar between ME7 and MED9.1) since there’s been a huge amount of work put into this on ME7. Bear in mind, it's a WOT scenario though.


	Logged

technic

Full Member

Karma: +18/-5
Offline

Offline

Posts: 227

	Re: Timing Oscillations « Reply #1 on: April 12, 2015, 12:49:00 PM »

What is VCDS block 020 showing? Looks like CF.


	Logged

Basano

Full Member

Karma: +90/-3
Offline

Offline

Posts: 192

	Re: Timing Oscillations « Reply #2 on: April 12, 2015, 01:15:52 PM »

CF's are very mild.

0 degrees correction on three cylinders and -3.75 on the fourth.

I've superimposed them here.

I'm wondering why zwout zig-zags around so rapidly even though the CF remains at a steady -3.75? Then around 6250 rpm, the oscillation in zwout dies down and still CF on that one cylinder is a steady -3.75


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Timing Oscillations « Reply #3 on: April 12, 2015, 04:45:32 PM »

Timing will always look like that during KR.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: Timing Oscillations « Reply #4 on: April 12, 2015, 04:51:01 PM »

KR = Timing correction while knocking (timing pull in at least 1 cylinder)?


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

prj

Hero Member

Karma: +1072/-480
Offline

Offline

Posts: 6035

	Re: Timing Oscillations « Reply #5 on: April 12, 2015, 04:55:52 PM »

Quote from: Basano on April 12, 2015, 01:15:52 PM

I'm wondering why zwout zig-zags around so rapidly even though the CF remains at a steady -3.75? Then around 6250 rpm, the oscillation in zwout dies down and still CF on that one cylinder is a steady -3.75

Because zwout is the current output timing after correction.
So if you have 3.75 CF on one cylinder, then due to the sample rate it will randomly jump to 3.75 and back.
If you had some special per-cylinder logging, the germans call it "Synchroraster", then you would see a pattern of 3 1 3 1 3 1 and so on, but since your logger is just best effort fixed in time, you see random jumps.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

Basano

Full Member

Karma: +90/-3
Offline

Offline

Posts: 192

	Re: Timing Oscillations « Reply #6 on: April 13, 2015, 12:13:14 AM »

I have learnt something new today.

Thank you.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 09:39:39 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search