A note about the Walbro E85 450LPH F90000267 fuel pump.

Pages: [1]

« previous next »

Author

Topic: A note about the Walbro E85 450LPH F90000267 fuel pump. (Read 12121 times)

rnagy86

Sr. Member

Karma: +6/-11
Offline

Offline

Posts: 367

	A note about the Walbro E85 450LPH F90000267 fuel pump. « on: April 23, 2015, 10:58:54 AM »

Hey,

Just wanted to share my findings using this pump with high fuel pressure. My car is running between 1.5-1.6 bar of boost with this pump on E85. I've been facing some higher RPM and intermittent leaning out issues. I figured I am just using the pump at it's limits so a compensation in FKKVS was needed, however the real issue was (after searching online) the pressure relief valve of the pump, which starts to open at 5.5 bar of fuel pressure.
Doing what's described in http://foreinnovations.blogspot.hu/2014/02/increase-fuel-pump-capacity-50-for-free.html "resolved" the issue and now neither any compensation is needed nor I am getting any lean spots at my boost levels. I am not saying this is a perfect solution, but at least there is someone on here who tested this method and can tell that it works.

Cheers!


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: A note about the Walbro E85 450LPH F90000267 fuel pump. « Reply #1 on: April 23, 2015, 08:44:59 PM »

Thanks for the info.


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

dal

Full Member

Karma: +6/-7
Offline

Offline

Posts: 210

	Re: A note about the Walbro E85 450LPH F90000267 fuel pump. « Reply #2 on: March 14, 2019, 07:09:37 AM »

Later F90000267 revisions include a 110psi relief valve.


	Logged

amd is the best

Sr. Member

Karma: +11/-5
Offline

Offline

Posts: 269

	Re: A note about the Walbro E85 450LPH F90000267 fuel pump. « Reply #3 on: April 10, 2019, 11:54:22 AM »

Quote from: dal on March 14, 2019, 07:09:37 AM

Later F90000267 revisions include a 110psi relief valve.

*F90000274.


	Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v

dal

Full Member

Karma: +6/-7
Offline

Offline

Posts: 210

	Re: A note about the Walbro E85 450LPH F90000267 fuel pump. « Reply #4 on: April 10, 2019, 01:01:10 PM »

Quote from: amd is the best on April 10, 2019, 11:54:22 AM

*F90000274.

I have an late revision F90000267 (2018MY), it has an 110psi relief valve.
I tested myself.


	Logged

amd is the best

Sr. Member

Karma: +11/-5
Offline

Offline

Posts: 269

	Re: A note about the Walbro E85 450LPH F90000267 fuel pump. « Reply #5 on: April 10, 2019, 02:42:25 PM »

The 274 is technically the high pressure version.


	Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v

dal

Full Member

Karma: +6/-7
Offline

Offline

Posts: 210

	Re: A note about the Walbro E85 450LPH F90000267 fuel pump. « Reply #6 on: April 10, 2019, 02:45:17 PM »

Yes it is, but F90000267 got upgraded too with higher pressure relief valve.


	Logged

amd is the best

Sr. Member

Karma: +11/-5
Offline

Offline

Posts: 269

	Re: A note about the Walbro E85 450LPH F90000267 fuel pump. « Reply #7 on: April 10, 2019, 04:44:44 PM »

Quote from: dal on April 10, 2019, 02:45:17 PM

Yes it is, but F90000267 got upgraded too with higher pressure relief valve.

So what you are claiming is that a 2018+ 267 pump is identical to the 274 pump?


	Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v

dal

Full Member

Karma: +6/-7
Offline

Offline

Posts: 210

	Re: A note about the Walbro E85 450LPH F90000267 fuel pump. « Reply #8 on: April 10, 2019, 07:12:48 PM »

Quote from: amd is the best on April 10, 2019, 04:44:44 PM

So what you are claiming is that a 2018+ 267 pump is identical to the 274 pump?

I dont know the year they changed this, but the fact is that they changed.
My 267 is from 2018. I tested it after reading this post, the link attached on the post.
The last setence is:

Quote

DOES THIS PUT THE PUMPS AT RISK?
Absolutely forget a pump warranty...but you're probably used to hearing that if you're using 80 psi of fuel pressure. By the way, TI Automotive is planning a future revision in the F90000267 to increase the blowoff pressure to 110 psi. Until then, this is the best way to accommodate high base+boost cars.

This text is from 2014.
Sometime after that TI automotive upgraded the 267 with higher pressure relief valve too.
I tested myself. I got 108psi with mine. If this is not sufficient for you, i'm done hahaha.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 29, 2024, 10:01:24 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search