Hello

This is my first post so i hope that its in the correct place.

ok my issue is that my cluster keeps complaining about the Washer Fluid and the Coolant Being low. I have replaced the water bottle and the sensors, tested the wiring and all seems good all the way to the cluster. Is it possible that there could be an issue on the cluster itself?
(ps: i plugged in a B6 S4 cluster and the error lights did not come on) this is the reason that i suspect the RS4 Cluster to be bad. is it possible to re-flash the cluster with software to rectify the issue or any other advise will me much appreciated.

Thanks in Advance