Pages: 1 ... 11 12 [13] 14 15 ... 34
Author Topic: Logging ME7 fast and flexible => ME7Logger  (Read 464407 times)
A6turbofrance
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 117


« Reply #180 on: August 05, 2012, 04:35:13 AM »

i thinks i have found my problem i can't connect with any logger
i have see on audizine that an aftermarket radio can cause kline interferance
i wanna try it without my rns-e for see...
Logged
Michel94
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 31


« Reply #181 on: August 15, 2012, 06:46:30 AM »

Hi, i'have problem to connect and test me7logger to a F-box:
If someone have an idea? thx
Logged
Michel94
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 31


« Reply #182 on: August 15, 2012, 07:02:32 AM »

i saw the cause of my problem, i must connect in ''double slowinit" , now i have a new problem!






« Last Edit: August 15, 2012, 07:48:22 AM by Michel94 » Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #183 on: August 16, 2012, 06:03:52 AM »

Flash your ECU to K-Box.
F-Box is bad anyway, it does not have ignition misfire checking and other things.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409



« Reply #184 on: August 19, 2012, 01:47:07 PM »

Guys owning a original vcds usb cable what cmd should use to play?
me7_logger -f my_log.cfg dont work
and for
me7_logger -L<> my_log.cfg i cant find the HEX address of my usb.

Any advice or this too noobish to answer  Roll Eyes ?
Logged

Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #185 on: August 20, 2012, 01:38:20 AM »

Set it to dumb mode and install the Ross Tech driver which creates a COM port.
Then uncheck "boot in intelligent mode".

After this connect using the created COM port.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409



« Reply #186 on: August 20, 2012, 01:36:23 PM »

Set it to dumb mode and install the Ross Tech driver which creates a COM port.
Then uncheck "boot in intelligent mode".

After this connect using the created COM port.

It works via cmd -f.

Thank you.
Logged

Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
Gonzo
Sr. Member
****

Karma: +20/-30
Offline Offline

Posts: 483


« Reply #187 on: August 21, 2012, 07:50:24 PM »

I love this logger but I can never get it to log over 15 samples/sec without pulling the cluster fuse or it will give me timeout errors Sad
Logged
s5fourdoor
Hero Member
*****

Karma: +33/-3
Offline Offline

Posts: 617


« Reply #188 on: August 21, 2012, 08:45:33 PM »

I love this logger but I can never get it to log over 15 samples/sec without pulling the cluster fuse or it will give me timeout errors Sad

Believe it or not, I keep it at 10 Hz...
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #189 on: August 22, 2012, 03:08:16 AM »

I log at 20hz on all cars and no timeout errors.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #190 on: August 22, 2012, 09:41:12 AM »

I log at 20hz on all cars and no timeout errors.

I find it works a lot better in USB mode, not COM port mode.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #191 on: August 22, 2012, 11:43:48 AM »

I run COM port mode and an el cheapo KKL cable. Never had any issues...
Logged

PM's will not be answered, so don't even try.
Log your car properly.
RS4boost
Full Member
***

Karma: +46/-0
Offline Offline

Posts: 125


« Reply #192 on: August 22, 2012, 01:07:49 PM »

Flash your ECU to K-Box.
F-Box is bad anyway, it does not have ignition misfire checking and other things.

@prj
Have you ever done this with success?
I mean RS4 551F to 551K...
« Last Edit: August 22, 2012, 02:01:54 PM by RS4boost » Logged

Gonzo
Sr. Member
****

Karma: +20/-30
Offline Offline

Posts: 483


« Reply #193 on: August 22, 2012, 01:40:17 PM »

I find it works a lot better in USB mode, not COM port mode.
USB just hangs at connection for me  Undecided
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #194 on: August 22, 2012, 02:02:05 PM »

@prj
Have you ever done this with success?

Yes, on this car:
http://prj-tuning.com/?p=253

Flashing must be done in boot mode. OBD bricks the ECU.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Pages: 1 ... 11 12 [13] 14 15 ... 34
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)