Pages: 1 ... 16 17 [18] 19 20 ... 34
Author Topic: Logging ME7 fast and flexible => ME7Logger  (Read 464458 times)
udcc11
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #255 on: April 24, 2013, 11:14:31 AM »

I'm stumped with the same problem I had a year ago when my water pump went out. I am having an Echo test failed, check cable is connected and ignition is on message on com3. Any other com I get can't open serial port com1,2,4 etc.

I'm using a newer vag com cable with it in dumb mode on a Windows 7 64 bit. Car is a 2000 S4 six-speed. Ignition is on and the light on the cable is on.

In Windows the Ross-Tech cable is labeled at this:
Location 0 (Port_#0004.Hub_#0001) (I don't know if this helps I'm just supplying the information.

What is going on with this that I can't figure out? Thanks for any help. I need this tune revisioned ASAP.
Logged
udcc11
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #256 on: April 24, 2013, 12:56:13 PM »

After a suggestion on Audizine I downloaded and installed this:
http://www.ross-tech.com/vag-com/usb/virtual-com-port.html

Now I try to run it FTDI as he suggested and am getting the echo test failed again on that now.
Logged
udcc11
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #257 on: April 25, 2013, 03:57:04 PM »

Any suggestions would be appreciated Sad
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #258 on: April 25, 2013, 04:03:30 PM »

If you didn't have the vcp installed AND enabled, it is unlikely that com3 is correct.


For me7l, and the ross-tech cable in dumb mode, you should use the -f option.

Please paste the output of what you are trying to do (no screen shot, just copy/paste the text from the cmd.exe box)
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
udcc11
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #259 on: April 25, 2013, 08:00:27 PM »

-> Reading log config file C:\ME7Logger\logs\Audi B5 S4 2.7T APB 250HP 026120611
0 1037352741.bin_template.cfg .... done
-> Reading ecu characteristics file C:\ME7Logger\ecus\Audi B5 S4 2.7T APB 250HP
0261206110 1037352741.bin.ecu .... done
Used Ecu definition is:
[Communication]
Connect      = SLOW-0x11
Communicate  = HM0
LogSpeed     = 56000

[Identification]
HWNumber           = "0261206110"
SWNumber           = "1037352741"
PartNumber         = "8D0907551A"
SWVersion          = "0003"
EngineId           = "2.7l V6/5VT"

Logged variables are:
#no.: name                , alias                           , addr  ,sz, bitm, S
, I,  A         ,   B, unit
#-------------------------------------------------------------------------------
-----------------------------
#001: dwkrz_0             , IgnitionRetardCyl1              , 380C17, 1, 0000, 1
, 0,        0.75,   0, '░KW'
#002: dwkrz_1             , IgnitionRetardCyl5              , 380C18, 1, 0000, 1
, 0,        0.75,   0, '░KW'
#003: dwkrz_2             , IgnitionRetardCyl3              , 380C19, 1, 0000, 1
, 0,        0.75,   0, '░KW'
#004: dwkrz_3             , IgnitionRetardCyl2              , 380C1A, 1, 0000, 1
, 0,        0.75,   0, '░KW'
#005: dwkrz_4             , IgnitionRetardCyl6              , 380C1B, 1, 0000, 1
, 0,        0.75,   0, '░KW'
#006: dwkrz_5             , IgnitionRetardCyl4              , 380C1C, 1, 0000, 1
, 0,        0.75,   0, '░KW'
#007: fr_w                , LambdaControl                   , 382CC8, 2, 0000, 0
, 0, 3.05176e-005,   0, '-'
#008: fra2_w              , AdaptationPartialBank2          , 3822BC, 2, 0000, 0
, 0, 3.05176e-005,   0, '-'
#009: fra_w               , AdaptationPartial               , 3822BE, 2, 0000, 0
, 0, 3.05176e-005,   0, '-'
#010: frm2_w              , LambdaControlAvgBank2           , 382CB8, 2, 0000, 0
, 0, 3.05176e-005,   0, '-'
#011: frm_w               , LambdaControlAvg                , 382CC2, 2, 0000, 0
, 0, 3.05176e-005,   0, '-'
#012: gangi               , SelectedGear                    , 380AF7, 1, 0000, 0
, 0,           1,   0, 'gear'
#013: lamsbg_w            , AirFuelRatioDesired             , 38229E, 2, 0000, 0
, 0, 0.000244141,   0, '-'
#014: ldtvm               , WastegateDutyCycle              , 380C62, 1, 0000, 0
, 0,    0.390625,   0, '%'
#015: mshfm_w             , MassAirFlow                     , 00F97A, 2, 0000, 0
, 0,   0.0277778,   0, 'g/s'
#016: nmot_w              , EngineSpeed                     , 00F878, 2, 0000, 0
, 0,        0.25,   0, 'rpm'
#017: plsol_w             , BoostPressureDesired            , 38219E, 2, 0000, 0
, 0,   0.0390625,   0, 'mbar'
#018: pus_w               , BaroPressure                    , 3820FE, 2, 0000, 0
, 0,   0.0390625,   0, 'mbar'
#019: pvdkds_w            , BoostPressureActual             , 38210E, 2, 0000, 0
, 0,   0.0390625,   0, 'mbar'
#020: rkat2_w             , AdaptationIdleBank2             , 383D04, 2, 0000, 1
, 0,    0.046875,   0, '%'
#021: rkat_w              , AdaptationIdle                  , 383D06, 2, 0000, 1
, 0,    0.046875,   0, '%'
#022: rkrn_w_0            , KnockVoltageCyl1                , 382550, 2, 0000, 0
, 0,   0.0195313,   0, 'V'
#023: rkrn_w_1            , KnockVoltageCyl5                , 382552, 2, 0000, 0
, 0,   0.0195313,   0, 'V'
#024: rkrn_w_2            , KnockVoltageCyl3                , 382554, 2, 0000, 0
, 0,   0.0195313,   0, 'V'
#025: rkrn_w_3            , KnockVoltageCyl2                , 382556, 2, 0000, 0
, 0,   0.0195313,   0, 'V'
#026: rkrn_w_4            , KnockVoltageCyl6                , 382558, 2, 0000, 0
, 0,   0.0195313,   0, 'V'
#027: rkrn_w_5            , KnockVoltageCyl4                , 38255A, 2, 0000, 0
, 0,   0.0195313,   0, 'V'
#028: rl_w                , EngineLoad                      , 00F98E, 2, 0000, 0
, 0,   0.0234375,   0, '%'
#029: rlmax_w             , EngineLoadCorrected             , 38266C, 2, 0000, 0
, 0,   0.0234375,   0, '%'
#030: rlmx_w              , EngineLoadSpecified             , 382670, 2, 0000, 0
, 0,   0.0234375,   0, '%'
#031: rlsol_w             , EngineLoadRequested             , 3821D2, 2, 0000, 0
, 0,   0.0234375,   0, '%'
#032: tabgm               , EGTModelBeforeCat               , 380A81, 1, 0000, 0
, 0,           5,  50, '░C'
#033: tabgm2              , EGTModelBeforeCatBank2          , 380A82, 1, 0000, 0
, 0,           5,  50, '░C'
#034: tans                , IntakeAirTemperature            , 380BAD, 1, 0000, 0
, 0,        0.75,  48, '░C'
#035: tats2_w             , EGTSensorBank2                  , 3823B2, 2, 0000, 0
, 0,   0.0195312,  50, '░C'
#036: tats_w              , EGTSensor                       , 3823B4, 2, 0000, 0
, 0,   0.0195312,  50, '░C'
#037: ti_b1               , FuelInjectorOnTime              , 382272, 2, 0000, 0
, 0,  0.00266667,   0, 'ms'
#038: usvk                , O2SVoltageSensor1               , 380AA4, 1, 0000, 0
, 0,  0.00521569, 0.2, 'V'
#039: usvk2               , O2SVoltageSensor1Bank2          , 380AA5, 1, 0000, 0
, 0,  0.00521569, 0.2, 'V'
#040: vfil_w              , VehicleSpeed                    , 380E10, 2, 0000, 0
, 0,   0.0078125,   0, 'km/h'
#041: wdkba               , ThrottlePlateAngle              , 380B0D, 1, 0000, 0
, 0,    0.392157,   0, '% DK'
#042: wped_w              , AccelPedalPosition              , 381EBA, 2, 0000, 0
, 0,   0.0015259,   0, '% PED'
#043: zwout               , IgnitionTimingAngleOverall      , 00F9F6, 1, 0000, 1
, 0,        0.75,   0, '░KW'
Logged data size is 71 bytes.
FTDI library version 30118
Echo test failed, check cable is connected and ignition is on
Initialization failed, exiting ...
exiting (cause=0x1)...

Is the -f the FTDI option or am I missing something?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #260 on: April 25, 2013, 09:57:57 PM »

yes. you omitted the most important part: what options you are passing to me7l
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
udcc11
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #261 on: April 26, 2013, 01:29:46 AM »

yes. you omitted the most important part: what options you are passing to me7l

What do I need to edit or change then? I can't seem to figure out what is missing that you see.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #262 on: April 26, 2013, 09:34:00 AM »

No idea. You didn't include the actual command in your copy/paste.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
DMVDUB
Newbie
*

Karma: +0/-8
Offline Offline

Posts: 20


« Reply #263 on: April 26, 2013, 06:28:52 PM »

Could someone give me a screenshot of how to setup the .txt file so it will log variables. I feel like I've tried it all, but everytime I delete the comment it just comes back to the same thing.... No variables selected.

If I had an example of what it looks like I'd be golden!

Please n thank you!
Logged
DMVDUB
Newbie
*

Karma: +0/-8
Offline Offline

Posts: 20


« Reply #264 on: April 26, 2013, 06:54:26 PM »

Nevermind I figured it out  Roll Eyes Duh.....
Logged
iznogoud
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 104

Learning junkie


« Reply #265 on: April 28, 2013, 06:19:18 PM »

Nevermind I figured it out  Roll Eyes Duh.....

Yeah, must have been something obvious that was overlooked. When I first used it, years ago now (wow!), it worked essentially out of the box on the same A-box ECU that you have.
Logged

Audi S4 B5 2000 6sp Cactus Green
Audi A4 B6 Avant 1.8T 2001.5 5sp Santorin Blue
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #266 on: May 10, 2013, 06:47:21 PM »

Here are my 2.7t 551M (ME7.1) extras

Torque variables (from phila? not sure who i got it from)

https://raw.github.com/nyetwurk/ME7L/master/ecus/torque.ecu

Stuff I also log not included above:

https://raw.github.com/nyetwurk/ME7L/master/ecus/extras.ecu
« Last Edit: May 10, 2013, 06:48:55 PM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353



« Reply #267 on: May 25, 2013, 02:11:48 PM »

Hello there ! I am trying to finally inpuy ALS and LC to my Cupra but I am having trouble with ME7info tool to id all the adressess.

I got the following error  " restypes 058x ->JMP not found in 2nd stage selector <889232> .
( also attached an image )

I tried various original ME7.5 files ,but no luck the same thing.

The file.ecu is made , but lots of adresses are missing , so I have only found a few to proceed with my project.

Does anyone know what is this error and how to fix ? I cant seem to find anything .

Thank you   

EDIT: I have trouble right now uploading the .png for some reason I will upload later , the error is exactly as I quoted
Logged

VAG cars newbie tuner Smiley
boomerro
Full Member
***

Karma: +4/-8
Offline Offline

Posts: 69



« Reply #268 on: June 03, 2013, 03:13:49 PM »

I logg with succes few days ago.
Today i try to log and result :

"Logged data size is 20 bytes.
can't locate function FT_GetLibraryVersion in dll
Initialization failed, exiting ...
exiting (cause=0x1)..."


what is going on ?

I am getting this same issue, no idea whats going on with the DLL, is something messed up with my drivers? vag-com and ecux work great though...
Logged

The goal of this site is to openly discuss ME7 tuning and promote good practices.
boomerro
Full Member
***

Karma: +4/-8
Offline Offline

Posts: 69



« Reply #269 on: June 05, 2013, 02:29:02 PM »

Figured it out. Got the rosstech dll for the vcp and put it in the bin folder for the logger. Works great.
Logged

The goal of this site is to openly discuss ME7 tuning and promote good practices.
Pages: 1 ... 16 17 [18] 19 20 ... 34
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 17 queries. (Pretty URLs adds 0s, 0q)