tbm
Full Member
Karma: +2/-1
 Offline
Posts: 176
|
 |
« on: May 27, 2015, 02:15:38 PM »
|
|
|
Hi All,
I've removed rear O2 sensor and catalyst in my Audi A4 with 8E0909518AT ECU. The below constants were disabled but CF for idle and part. throttle are always 0. I've checked DTC there were not any. I have been trying found out for several days and it seems the root cause is CLRSHK and CLRSKA. I have not disabled these ones due to I can't find this.
So the question is - could it be that because of these const CF is not working?
Thanks in advance!
CWKONABG
CDSLS
CDKAT
CDHSH
CDHSHE
CDLATV
CDLASH
CDLSH
PS My .kp map file is attached maybe someone else will need this as well.
|
|
|
|
« Last Edit: May 27, 2015, 02:20:55 PM by tbm »
|
Logged
|
|
|
|
soul87
Jr. Member
Karma: +5/-0
Offline
Posts: 44
|
|
« Reply #1 on: December 04, 2019, 01:45:06 AM »
|
|
|
Hi, Did You sort it out ?
I have similiar problem in 8E ECU
ECU 8E0909518AS
I want to disable Catalyst heating, Ignition Retard and VVT overlap etc etc but setting CWKONABG to 0 disable lambda correction ...
|
|
|
|
|
Logged
|
|
|
|
|
BlackT
|
|
« Reply #2 on: December 04, 2019, 03:07:41 AM »
|
|
|
This is what I did in my file, fuel trims are working no DTC. I don't have CAT,SAI pump,and second O2
And of course I modified ESKONF
|
|
|
|
|
Logged
|
|
|
|
fknbrkn
Hero Member
Karma: +177/-18
Offline
Posts: 1401
mk4 1.8T AUM
|
|
« Reply #3 on: December 04, 2019, 05:33:50 AM »
|
|
|
Hi, Did You sort it out ?
I have similiar problem in 8E ECU
ECU 8E0909518AS
I want to disable Catalyst heating, Ignition Retard and VVT overlap etc etc but setting CWKONABG to 0 disable lambda correction ...
It's ok Leave it untouched or iirc set to 1 |
|
|
|
|
Logged
|
|
|
|
|
prj
|
|
« Reply #4 on: December 04, 2019, 09:49:58 AM »
|
|
|
CWKONABG does not disable lambda correction. You're changing something wrong.
|
|
|
|
|
Logged
|
|
|
|
soul87
Jr. Member
Karma: +5/-0
Offline
Posts: 44
|
|
« Reply #5 on: December 05, 2019, 12:44:51 AM »
|
|
|
Funny thing is that for a test I grab the full stock file, then I changed only CWKONABG to 00 and the same results, it disable lambda regulation completly ..........
|
|
|
|
|
Logged
|
|
|
|
soul87
Jr. Member
Karma: +5/-0
Offline
Posts: 44
|
|
« Reply #6 on: December 05, 2019, 01:45:52 AM »
|
|
|
This is what I did in my file, fuel trims are working no DTC. I don't have CAT,SAI pump,and second O2
And of course I modified ESKONF
I dont like a way to disable something only with DTC's For my perspective better is to disable things by Codewords , not Error Classes... |
|
|
|
|
Logged
|
|
|
|
|
adam-
|
|
« Reply #7 on: December 05, 2019, 02:14:14 AM »
|
|
|
I dont like a way to disable something only with DTC's
For my perspective better is to disable things by Codewords , not Error Classes...
That's not what he said. |
|
|
|
|
Logged
|
|
|
|
soul87
Jr. Member
Karma: +5/-0
Offline
Posts: 44
|
|
« Reply #8 on: December 05, 2019, 02:26:43 AM »
|
|
|
Anyway, How its possible to CWKONABG at 0 disable lambda correction  |
|
|
|
|
Logged
|
|
|
|
|
BlackT
|
|
« Reply #9 on: December 05, 2019, 02:41:51 AM »
|
|
|
Anyway, How its possible to CWKONABG at 0 disable lambda correction I tried in 4 cars seting CWKONABG to 0 and it does not disable lambda corection, are you sure your adress is right? BDW. I know Codewords are not best opinion, but in some cases is enought |
|
|
|
|
Logged
|
|
|
|
curamrdan
Full Member
Karma: +4/-1
Offline
Posts: 128
|
|
« Reply #10 on: December 05, 2019, 04:56:11 AM »
|
|
|
I met disabled O2 feedback, when there is particular DTC (around lambda,evap ect.) If so, solve them first and see if its help. And, also, on some cars, after flash i must go drive a car, to start O2 feedback working immediately. Just stationary idle or reving is not enought. Weird, but its my experience.
|
|
|
|
|
Logged
|
|
|
|
|
prj
|
|
« Reply #11 on: December 05, 2019, 08:18:47 AM »
|
|
|
Funny thing is that for a test I grab the full stock file, then I changed only CWKONABG to 00 and the same results, it disable lambda regulation completly ..........
Again. CWKONABG does NOT disable lambda correction! Which means - you are not changing CWKONABG, your def is wrong. And most likely not only CWKONABG. You have a full a2l file for your ECU? Or let me guess you downloaded a random xdf off the website and loaded it? |
|
|
|
|
Logged
|
|
|
|
soul87
Jr. Member
Karma: +5/-0
Offline
Posts: 44
|
|
« Reply #12 on: December 05, 2019, 09:27:05 AM »
|
|
|
Again. CWKONABG does NOT disable lambda correction!
Which means - you are not changing CWKONABG, your def is wrong.
And most likely not only CWKONABG.
You have a full a2l file for your ECU?
Or let me guess you downloaded a random xdf off the website and loaded it?
Nope, You missed. I'm not newbie in me7 Stock file attached. And CWKONABG def... |
|
|
|
|
Logged
|
|
|
|
fknbrkn
Hero Member
Karma: +177/-18
Offline
Posts: 1401
mk4 1.8T AUM
|
|
« Reply #13 on: December 05, 2019, 09:41:07 AM »
|
|
|
I have the same experience with 4B0906018DJ ecu
Checked with ida, compared to a2l project and no mistake here
|
|
|
|
|
Logged
|
|
|
|
|
prj
|
|
« Reply #14 on: December 05, 2019, 10:14:31 AM »
|
|
|
IDK, I never had this problem with CWKONABG.
But then... I tune less ME7 cars per year than I have fingers these days, because they're too old.
If you are sure it kills your fuel trims, then just set it to 1.
But I think you have some other fault codes/issues on the car. If you fix those, CWKONABG to 0 might not kill your fueltrims anymore.
|
|
|
|
|
Logged
|
|
|
|
|
