Pages: [1]
Author Topic: EDC17CP14 (USA) 2012+  (Read 4582 times)
reset
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 17


« on: May 28, 2015, 02:54:35 PM »

What tool is needed to read these? Or what are others using.
My kessv2 and Ktag simply aren't talking to them. 2011 and earlier work fine. though. Sent Alientech an ECU and waiting for a response, which is taking a long time.
I am shopping for a different tool that I can actually use, just in case alientech doesn't come through.
Any suggestions?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: May 28, 2015, 03:01:55 PM »

i use x17.
just did one today actually.
« Last Edit: May 28, 2015, 03:03:43 PM by k0mpresd » Logged
thesnowman
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 21


« Reply #2 on: May 28, 2015, 06:35:57 PM »

Tried them as TPROT? Some wont communicate as "normal" EDC17 and you need to go through the protocol menu and select TPROT3 protocols


KTAG         Protocols -> tricore -> VAG EDC17 TROPT 8/10

Logged
reset
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 17


« Reply #3 on: June 04, 2015, 11:11:17 AM »

yes I tried every protocol/plugin that ktag/kess has for VAG edc17, even if they didn't seem to be the right one.

Logged
reset
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 17


« Reply #4 on: June 04, 2015, 12:10:12 PM »

i use x17.
just did one today actually.

boot or OBD?
MMS seems to think it's boot only
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #5 on: June 04, 2015, 01:16:24 PM »

always boot.
Logged
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #6 on: June 04, 2015, 04:10:54 PM »

CMD does new CP14 too.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)