SKC code position on EDC15P+ EEPROM

Pages: [1]

« previous next »

Author

Topic: SKC code position on EDC15P+ EEPROM (Read 4293 times)

diwasas

Newbie

Karma: +0/-0
Offline

Offline

Posts: 15

	SKC code position on EDC15P+ EEPROM « on: May 31, 2015, 09:02:20 PM »

Hi,

I have EEPROM file from EDC15P+ ECU, in which position I have to look for SKC code? Is it byte 32 and 33? The code was also received with VAG dash, but it seems to be incorrect, I'm getting an error, while trying to login with received code with VCDS at engine block, so I cant do an adaptation with Instrument Cluster in VCDS and VAG-COM.

Can I perform an adaptation with Instrument Cluster by editing this EEPROM file? I guess I have to write Immo number and SKC/Immo PIN from instrument cluster?

I can not post EEPROM file at the moment, I'll post it later if needed.

Audi A4B6 1.9TDI 96kw.


	Logged

ds266

Newbie

Karma: +0/-0
Offline

Offline

Posts: 2

	Re: SKC code position on EDC15P+ EEPROM « Reply #1 on: November 05, 2016, 03:01:33 AM »

Hi does anyone know the answer to this please?
I've tried bytes 32 & 33 as for ME7.1 but did not work
Is the skc in the ecu map please, anyone?


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1601

	Re: SKC code position on EDC15P+ EEPROM « Reply #2 on: November 05, 2016, 03:27:24 AM »

use this tool


	Logged

ds266

Newbie

Karma: +0/-0
Offline

Offline

Posts: 2

	Re: SKC code position on EDC15P+ EEPROM « Reply #3 on: November 05, 2016, 07:10:20 AM »

Thank you, the Immo box is blank??


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 25, 2024, 10:32:47 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search