Pages: 1 ... 3 4 [5]
Author Topic: The 11 maps that I would like to know ! ! !  (Read 39673 times)
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12256


WWW
« Reply #60 on: July 09, 2015, 11:15:35 AM »

KRKTE is for WOT right? but affects the idle?

What?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #61 on: July 09, 2015, 03:53:20 PM »

What?

Have here in others posts a ori file and changed file in KRKTE for i examine?

Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #62 on: July 14, 2015, 02:24:15 PM »

I make the same way that the overspeed say for ignition timing, and was the best!!!

My unique problem now is fuel!

At the moment, my KRKTE is down in 3%, down TEMIN 8.85%, down  TEMINVA 7.89% and up the FKKVS in 10%!

After i increase 10% in FKKVS the engine obtain so much power!!! and less fails in warmup.

I dont know how i will solve this problem in warmup...

Remember, this is for E100 and 55% bigger injectors.

In my other passat, 1.8 20v, i use 550cc injectors (more than 100% bigger) for E100, and i down FGATO in 45% and down TEMIN in 15%, in this configuration my engine dont fails when cold, warmup and hot.

I dont know whats the problem when i use small injectors!

Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #63 on: July 23, 2015, 08:42:27 PM »

i dont found the KFFWL!
Sad

i have the address of KFFWL in the A3 ME7.5 file, but i search a similar map in my ME7.1 file, but dont have any map like the ME7.5 map!

for i finalize my E100 file, i just need to know this map for correct warm up!

Logged
Pages: 1 ... 3 4 [5]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.028 seconds with 18 queries. (Pretty URLs adds 0s, 0q)