Pages: [1]
Author Topic: Problem reading/writing 8L S3 BAM 225 ME7.5  (Read 2861 times)
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705


« on: July 15, 2015, 06:02:50 AM »

Hi,

I'm trying to read the file from a 2002 S3 225 1.8t BAM. I'm using a Galletto v54 and the options under S3 are 215bhp 29F400BB and 29F800BB. Now from research this ECU is a 1MB file so is 29F800BB, but when I ID the ECU, it IDs OK but tells me to change driver to 29F400BT!

No combination of driver allows me to read the file. Is this a known bug, will NefMoto write it?
Logged
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 385



« Reply #1 on: July 15, 2015, 08:03:41 AM »

Hi,

I'm trying to read the file from a 2002 S3 225 1.8t BAM. I'm using a Galletto v54 and the options under S3 are 215bhp 29F400BB and 29F800BB. Now from research this ECU is a 1MB file so is 29F800BB, but when I ID the ECU, it IDs OK but tells me to change driver to 29F400BT!

No combination of driver allows me to read the file. Is this a known bug, will NefMoto write it?

Galetto don´t Work Ok with these... on Golf 29F800 it can read, but when writing lock about 8% and you´ll have to boot to recover...  on A3 180 With 29F400 it can read and write Ok, but sometimes locks too
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)