Pages: [1]
Author Topic: Me7_95949 Fail 0x01 (SOLVED)  (Read 3209 times)
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663



« on: July 22, 2015, 03:15:01 PM »

Hello.. Could need som assitance

me7_95040.exe Reads the EEPROM and efter some time I get [..FAIL.. error=0x01. closing COM5]

Could it be something with the baud rate?
« Last Edit: July 22, 2015, 04:19:11 PM by Jim_Coupe » Logged

E85oholic
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663



« Reply #1 on: July 22, 2015, 04:15:42 PM »

Hello.. Could need som assitance

me7_95040.exe Reads the EEPROM and efter some time I get [..FAIL.. error=0x01. closing COM5]

Could it be something with the baud rate?

I think i found my problem.. I connected 12V to pin62 (Ignition) Then it worked.. I could also have been cable error.
Logged

E85oholic
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663



« Reply #2 on: July 22, 2015, 04:17:35 PM »

BTW.. Where can i get a .bin that cleans my immo? This is a spare ECU for testing use.  Or do i have to find an exact same file but a working one ?
Logged

E85oholic
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663



« Reply #3 on: July 22, 2015, 04:20:30 PM »

BTW.. Where can i get a .bin that cleans my immo? This is a spare ECU for testing use.  Or do i have to find an exact same file but a working one ?
Logged

E85oholic
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)