retreiving map of dead ecu me 7.5

Pages: [1]

« previous next »

Author

Topic: retreiving map of dead ecu me 7.5 (Read 4132 times)

dik-van-dub

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	retreiving map of dead ecu me 7.5 « on: July 25, 2015, 01:07:32 PM »

hi guys does anyone know a way of retrieving a map from an ecu thats dead? ive managed to damage the tracks trying to remove the 95040 chip from ecu but would like to try and retrieve the map back off it to load onto my new one


	Logged

armageddon

Sr. Member

Karma: +20/-3
Offline

Offline

Posts: 348

	Re: retreiving map of dead ecu me 7.5 « Reply #1 on: July 25, 2015, 03:07:33 PM »

remove the flash eprom and solder it on new ecu or use some eprom programer to read it


	Logged

dik-van-dub

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	Re: retreiving map of dead ecu me 7.5 « Reply #2 on: July 26, 2015, 05:42:25 AM »

which one is the flash eeprom?


	Logged

armageddon

Sr. Member

Karma: +20/-3
Offline

Offline

Posts: 348

	Re: retreiving map of dead ecu me 7.5 « Reply #3 on: July 26, 2015, 06:19:57 AM »


	Logged

dik-van-dub

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	Re: retreiving map of dead ecu me 7.5 « Reply #4 on: July 26, 2015, 07:33:48 AM »

cheers for that


	Logged

fredrik_a

Full Member

Karma: +25/-0
Offline

Offline

Posts: 221

	Re: retreiving map of dead ecu me 7.5 « Reply #5 on: July 26, 2015, 04:23:57 PM »

Readers are available from several manufacturers in several different versions with different coverage.
Through the years, I've used a BX40 from http://www.batronix.com/shop/programmer/eprom-programmer.html and it works perfectly.


« Last Edit: July 26, 2015, 04:27:02 PM by fredrik_a »	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 10:48:17 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search