Pairing used cluster and ecu

Pages: [1] 2 3

« previous next »

Author

Topic: Pairing used cluster and ecu (Read 20648 times)

GhostxFx

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 28

	Pairing used cluster and ecu « on: August 05, 2015, 08:03:47 AM »

i managed to frie my ecu and make my cluster unreadable (think it was soldered to death)
Because of this i cant retrive any information from old units Roll Eyes

The audi workshop wants to replace ecu, cluster, immo box, keys, locks estimated to 2000-3000 eur. They also claim it's impossible to pair these units without reading the codes from the cars they came from Shocked

I have bought a used ecu and cluster also got vcds lite.

I am wondering how to pair these two units, they are from different cars, i have the login for the ecu (got it with the 95040 tool from this forum)
Do i need to virginize ecu, cluster, both maby? havent find a tool to read/ write the cluster eeprom yet.

the vin nr on the car is WAUZZZ8EZ1A020142

Audi A4 1.8t quattro 2001
ecu: bosh me 7.5 8e0906018b
cluster: i have no idea Huh

Hope someone can help me Tongue


	Logged

ddillenger

Moderator
Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Pairing used cluster and ecu « Reply #1 on: August 05, 2015, 08:14:43 AM »

You will need a new transponder for your key. The old one can only be tied to one immo ID. After that, adapt the ecu to the cluster, then complete key learning.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

GhostxFx

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 28

	Re: Pairing used cluster and ecu « Reply #2 on: August 05, 2015, 12:55:02 PM »

Oh i didn't know that i needed a new transponder, thanks Wink

but how is the adapting process possible when i don't have the login code for the cluster?

Im guessing i have the immo II so i have been reading this page

http://wiki.ross-tech.com/wiki/index.php/Immobilizer_II_Immobilizer_Swapping_(Instrument_Cluster)


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: Pairing used cluster and ecu « Reply #3 on: August 06, 2015, 01:36:14 AM »

You can pull the login code from the cluster dump, use VAG-commander 5.1 or similar. Or even pull your dump from the clocks and we can tell you the code. I'm sure vag-com tells you the login code on the actual GUI. It's either that, or another piece of software.

Either way, it's pretty easy man!


	Logged

GhostxFx

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 28

	Re: Pairing used cluster and ecu « Reply #4 on: August 06, 2015, 02:58:24 AM »

I have heard about vag commander, but i dont have the cable to use that program. i have blue kkl 409,1. What do you mean by "Or even pull your dump from the clocks" i don't understand Huh

Thanks for reply


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: Pairing used cluster and ecu « Reply #5 on: August 06, 2015, 03:24:04 AM »

You can use that cable no problem. I honestly can't remember what software I used last, but I've got it at home and can tell you when I get there. I can even put it on my dropbox for you to have a copy.

You've got loads of time to read up while you wait for a new transponder to arrive anyway dude!


	Logged

GhostxFx

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 28

	Re: Pairing used cluster and ecu « Reply #6 on: August 06, 2015, 09:20:25 AM »

oh thought i needed a hex-can cable or something like that to use it.

That would be fantastic! Grin


	Logged

GhostxFx

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 28

	Re: Pairing used cluster and ecu « Reply #7 on: August 07, 2015, 12:39:16 PM »

I tried vag commander 1.4 2.5 3.0 5.1 and 5.5 also two pin readers and some of them say channel open but i can't do anything and the rest of them don't connect (device no wake up/ no respons, something like that) Also tried vag tacho/ dash but i don't find the device. Tried installing some of the drivers but windows will only accept the driver it downloads from windows update Angry

tried the k-line and ISO 9141 kwp2000
also tried xp mode, same result

vcds connects fine


	Logged

turboat

Hero Member

Karma: +45/-3
Offline

Offline

Posts: 619

	Re: Pairing used cluster and ecu « Reply #8 on: August 08, 2015, 02:02:22 AM »

I usually use vag eeprom programmer, there's a download somewhere on here, think it's linked from one of the vag commander threads. The clone vag tacho is a pos, don't bother with that.


	Logged

GhostxFx

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 28

	Re: Pairing used cluster and ecu « Reply #9 on: August 08, 2015, 05:16:00 AM »

Work like charm Cheesy

thanks man Wink

This is the login code i get from the motomoter.dat file 63867 this can't be right?

uploading both the dat and the eeprom file


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: Pairing used cluster and ecu « Reply #10 on: August 08, 2015, 01:50:11 PM »

Sure that's a proper read out?


	Logged

GhostxFx

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 28

	Re: Pairing used cluster and ecu « Reply #11 on: August 08, 2015, 05:47:23 PM »

I have no idea, never done it before, it didn't show the login code in the interface, only softcode i think it was.


	Logged

GhostxFx

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 28

	Re: Pairing used cluster and ecu « Reply #12 on: August 09, 2015, 08:59:46 AM »

So i put the cluster into new mode and read the eeprom, this is what i got
login 9786

But it doesn't work Huh

Here is the eeprom file and a picture, can anyone tell me what im doing wrong? this is getting annoying Cry


	Logged

ddillenger

Moderator
Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Pairing used cluster and ecu « Reply #13 on: August 09, 2015, 09:52:37 AM »

Did you login with 9786 or 09786?


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: Pairing used cluster and ecu « Reply #14 on: August 09, 2015, 10:48:47 AM »

+1; that's a better read and I can confirm the same login code. You always stick a 0 at the start of the code though, so that it reads 09786, rather than just 9786.

Good luck!


	Logged

Pages: [1] 2 3

« previous next »

Jump to:

Navigation

Personal Tools

November 29, 2024, 11:06:24 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search