VCDS cable problems with Nef flashing softwrae

Pages: [1]

« previous next »

Author

Topic: VCDS cable problems with Nef flashing softwrae (Read 11504 times)

hytron

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 42

	VCDS cable problems with Nef flashing softwrae « on: August 20, 2015, 11:59:04 PM »

I am using original Ross-Tech VCDS HEX-USB adapter (Not the Chinese fake version) and I am unable to establish the communication.

The error on the bottom that I am getting is:
Failed to read test echo from FTDI device.

I have also attached the screenshot of the error along with the adapter model I am using.

Please help!!


« Last Edit: August 21, 2015, 12:09:46 AM by hytron »	Logged

k0mpresd

Hero Member

Karma: +146/-54
Offline

Offline

Posts: 1655

	VCDS cable problems with Nef flashing softwrae « Reply #1 on: August 21, 2015, 12:01:11 AM »

vcl drivers installed incorrectly or cable not in dumb mode.


	Logged

hytron

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 42

	VCDS cable problems with Nef flashing softwrae « Reply #2 on: August 21, 2015, 12:10:57 AM »

Quote from: k0mpresd on August 21, 2015, 12:01:11 AM

vcl drivers installed incorrectly or cable not in dumb mode.

I am not sure how to set the adapter in the dumb mode? The VCDS software works fine with it. Is it through VCDS software?


« Last Edit: August 21, 2015, 12:18:35 AM by hytron »	Logged

adam-

Hero Member

Karma: +123/-33
Offline

Offline

Posts: 2179

	VCDS cable problems with Nef flashing softwrae « Reply #3 on: August 21, 2015, 12:42:53 AM »

Yeah, in the Settings page of VCDS, select Dumb Mode..


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	VCDS cable problems with Nef flashing softwrae « Reply #4 on: August 21, 2015, 09:54:43 AM »

Quote from: hytron on August 20, 2015, 11:59:04 PM

http://s4wiki.com/wiki/Tuning#Flashing_utilities

The Nefmoto Free ECU Flashing Software and an eBay USB VAG KKL cable - The easiest and best supported method. Does not rely on boot mode, but will not flash bricked ECUs because bootmode support is not complete. You can also use (recent) VCDS (Ross-tech) cables with Nefmoto, but you may have to disable "intelligent mode" in the VCDS setup dialog (intelligent mode causes the VCDS driver software to constantly poll the cable in the background, which may interfere with non VCDS apps). For more information, see the Nefmoto Flashing Guide.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

hytron

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 42

	Re: VCDS cable problems with Nef flashing softwrae « Reply #5 on: August 21, 2015, 10:39:08 PM »

The vehicle in question is 2006 VW Jetta TDI. This info is provided by VCDS:

Address 01: Engine Labels: 038-906-016-BEW.lbl
Part No SW: 03G 906 016 AB HW: 028 101 223 8
Component: R4 1,9L EDC G000SG 7550
Revision: --H01--- Serial number: VWZ7Z0E2762844
Coding: 0050071
Shop #: WSC 00066 000 00000
VCID: 63C5AAA8A2D43206E91-8036

The VCDS adapter was purchased about year and half ago, I assume it is new enough. It has the latest firmware from Ross-Tech downloaded a month ago (Version 1.94).

I have unchecked all of the boxes in VCDS related to the adapter. Unplugged the adapter from both the computer and vehicle. Waited 10 seconds. Plugged everything back in. I got the following message in the status window:

Connecting...
Starting slow init connection.
Connecting to address 0x01.
Slow init succeeded.
Switching to KWP2000 session.
Connected
Disabling Windows sleep mode.
Reading all ECU info.
Starting diagnostic session.
Successfully started diagnostic session.
Negotiating communication timings.
Timing negotiation failed. Communication timings are unchanged.
Reading all ECU info failed.
100% complete.
Restoring Windows sleep mode.
Disconnecting...
Disconnected

What could be wrong?


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: VCDS cable problems with Nef flashing softwrae « Reply #6 on: August 21, 2015, 10:51:17 PM »

That ECU is EDC not ME7


	Logged

turboat

Hero Member

Karma: +45/-3
Offline

Offline

Posts: 619

	Re: VCDS cable problems with Nef flashing softwrae « Reply #7 on: August 22, 2015, 01:39:01 AM »

Lol


	Logged

hytron

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 42

	Unable to read mkV ECU « Reply #8 on: August 24, 2015, 11:21:37 AM »

I attempted to read ECU of my mkV 06 TDI and no luck. Am I missing something or this software cannot be used on these ECUs?


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: VCDS cable problems with Nef flashing softwrae « Reply #9 on: August 24, 2015, 11:27:12 AM »

Quote from: nyet on August 21, 2015, 10:51:17 PM

That ECU is EDC not ME7

...


	Logged

hytron

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 42

	Re: VCDS cable problems with Nef flashing softwrae « Reply #10 on: August 27, 2015, 01:12:15 PM »

Ok I see the earlier post... I didn't realize it was EDC controller.

Thank you for the help!!!


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 05:23:32 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search