it started here
http://nefariousmotorsports.com/forum/index.php?topic=8676.0title=   
Key destroyed, got another one, immo off the ecu, car starts, hazard flashing immo light blinks

then onto here
http://nefariousmotorsports.com/forum/index.php?topic=8734.0title=
need immo back on, write works, verify fails, emprom read doesnt match source.

now i put original bin back in, bought new key followed ross tech instructions and car behaved exactly like ross tech says. immo thing blinked went off, etc etc but now car still doesnt start and stay running.


this is months of this nonsense, is there a super delete or very invasive way to remove the immo crap?  remove the chips from cluster and ecu? im up for anything that will definitively work. it looks like something is wrong and i dont know what. all of the tools provided here are working as advertised and giving the correct feedback and results but im not getting the final result i need. bottom line is im sick of this and just need something to work. if you guys are out of ideas ill just replace the cluster, ecu and key from another car and be done with it. i would just like a less expensive way first.

thank again for any help.

yes
17978 - Engine Start Blocked by Immobilizer
            P1570 - 008 -

No it wasn't, when I did the immo off the car ran but the hazards flashed and the dash immo light wouldn't shut off.  The key wasn't matched to the car.

I put original bin back in and now the car doesn't run, and shouldn't because immo is back on.
I programmed the key correctly and car still doesn't work