Pages: [1]
Author Topic: First attempt with Me7, can't find correct ECU file B5 S4  (Read 3053 times)
jbain2
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: September 15, 2015, 08:04:39 AM »

Trying to log for the first time with Me7. I have been through the ECU files for my B5 S4. It is currently running an OTS K04 tune from EPL.

Below are the screen shots that I am getting with the first being the engine control from VCDS.



Second shot from Me7, tracked down a different file after this.



Last run. I can't find this file. Any help would be appreciated. Thanks.

Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #1 on: September 15, 2015, 01:37:01 PM »

Try taking a stock file, change the software id's to what your file has, calc checksums, and generate an ecu file from that.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #2 on: September 15, 2015, 01:51:19 PM »

You'll have to manually change the EngineId in the ecu def file... a real problem with ME7L, it is really picky for some dumb reason... which means it won't log ECUs that have modified EngineIds.

dumb, i know...
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)