2.7T reduced power

Pages: [1]

« previous next »

Author

Topic: 2.7T reduced power (Read 5062 times)

majsterx

Newbie

Karma: +0/-0
Offline

Offline

Posts: 15

	2.7T reduced power « on: September 30, 2015, 01:32:56 AM »

Hello friends, my car have much reduced power.
Engine is ARE and i measure about 50PS lower. Tune or not maximum boost is about 0.4b, and strictly catch it, without any oscillation.
But... sure there is problem with EGT sensor. Have two or only one sensor ? (one error)
EGT in log have one value (945*C ? im not sure now) so it's possible dropping boost and fuel ?
Is using for protect and diagnostic or only diagnostic ? maybe better remove it from ecu


	Logged

IamwhoIam

Hero Member

Karma: +52/-115
Offline

Offline

Posts: 1070

	Re: 2.7T reduced power « Reply #1 on: September 30, 2015, 05:25:44 AM »

Yes, remove the EGT sensor in the ECU and then go do a log as high as you can reach in 6th gear on the Autobahn please.


	Logged

I have no logs because I have a boost gauge (makes things easier)

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: 2.7T reduced power « Reply #2 on: September 30, 2015, 07:40:42 AM »

Quote from: IamwhoIam on September 30, 2015, 05:25:44 AM

Yes, remove the EGT sensor in the ECU and then go do a log as high as you can reach in 6th gear on the Autobahn please.

Genuinely just followed your advice and did a pull to the limiter in 6th and my engine has seized. What the fuck dude.


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: 2.7T reduced power « Reply #3 on: September 30, 2015, 08:37:22 AM »

Quote from: IamwhoIam on September 30, 2015, 05:25:44 AM

Yes, remove the EGT sensor in the ECU and then go do a log as high as you can reach in 6th gear on the Autobahn please.

If you put a small ladder in the backseat, you'll be able to reach much higher.


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

majsterx

Newbie

Karma: +0/-0
Offline

Offline

Posts: 15

	Re: 2.7T reduced power « Reply #4 on: September 30, 2015, 09:11:59 AM »

Quote from: IamwhoIam on September 30, 2015, 05:25:44 AM

Yes, remove the EGT sensor in the ECU and then go do a log as high as you can reach in 6th gear on the Autobahn please.

Maybe batter idea will be change RPM limiters to 10k and then log it. Thanks for you advice.

I decided repair both. Not much cost because i repair it by myself. Sure there is a biggest problem.


	Logged

Snow Trooper

Hero Member

Karma: +90/-24
Offline

Offline

Posts: 689

	Re: 2.7T reduced power « Reply #5 on: September 30, 2015, 10:26:47 AM »

It's a tip, they always have less power.


	Logged

cartoons?
6A 61 72 65 64 40 76 6C 6D 73 70 65 63

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: 2.7T reduced power « Reply #6 on: September 30, 2015, 11:12:13 AM »

Quote from: majsterx on September 30, 2015, 01:32:56 AM

The stock egt's are narrowband. They don't read until egt's exceed 945C, so seeing a flat 945 is normal and nothing to be concerned with.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 05:25:50 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search