Pages: [1]
Author Topic: VW mk4 auto to manual swap  (Read 4982 times)
veedabowlu
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« on: October 07, 2015, 09:30:13 AM »

I just finished converting a 2003 VW jetta 1.8t from a failed tiptronic to a manual 5 speed.  Can someone help me convert this automatic ECU file to become a manual transmission ECU file.  I do know on the earlier cars it was as easy as recoding the ECU to manual gearbox.  But this ECU will not accept manual gearbox coding... please help. 

Not shy of the wrench, but new to this file stuff.
Logged
elRey
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 565


« Reply #1 on: October 07, 2015, 10:08:35 AM »

Why not flash over it with a manual LP file? Is the LQ tuned?
Logged
veedabowlu
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #2 on: October 07, 2015, 10:10:44 AM »

No the file is not tuned...I didn't want to mess up the immobilizer, etc... I don't have a file to flash it to...
Logged
veedabowlu
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #3 on: October 07, 2015, 10:27:40 AM »

Do you have a file that I can flash to this without messing up the immobilizer, VIN, etc...
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #4 on: October 07, 2015, 10:58:41 AM »

reflashing only the flash will not affect the immo at all. only if you touch the 95040 chip.
Logged
veedabowlu
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #5 on: October 07, 2015, 11:00:52 AM »

OK... great do you have I file that I can flash onto this ECU, that will turn it into a manual transmission ECU?
Logged
veedabowlu
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #6 on: October 07, 2015, 11:24:49 AM »

I found one...flashed without any trouble so far... as soon as the weather lets up, I will go for a drive.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)