Locked up an Me7.1.1 ECU with wrong or bad flash

Pages: 1 [2]

« previous next »

Author

Topic: Locked up an Me7.1.1 ECU with wrong or bad flash (Read 22007 times)

SteveKen

Newbie

Karma: +1/-1
Offline

Offline

Posts: 20

	Re: Locked up an Me7.1.1 ECU with wrong or bad flash « Reply #15 on: July 18, 2012, 02:25:21 PM »

Well, I was able to revive the ECU with the Galletto after all.

I followed the above procedure after I noticed that I had the K Line wired incorrectly into the L Line of the OBD plug.

Stupid me.

thanks to all for the assistance.


	Logged

Milka

Full Member

Karma: +3/-0
Offline

Offline

Posts: 129

	Re: Locked up an Me7.1.1 ECU with wrong or bad flash « Reply #16 on: September 22, 2012, 05:16:08 AM »

Hey Steve,

How did you manage to read/write it in boot mode? I can't for the life of me manage to get it to work? The ECU seems to be in boot mode as I can't conned with Nefmoto or VCDS anymore but just does not want to read or write? Did you end up having to unsolder the 000 resistor on the back fo the ECU?


	Logged

Milka

Full Member

Karma: +3/-0
Offline

Offline

Posts: 129

	Re: Locked up an Me7.1.1 ECU with wrong or bad flash « Reply #17 on: September 22, 2012, 09:45:33 PM »

Ok, figured it out.... Turned out it was the Voltage that was too high? Based on what I read I thought it best to use a > 13v source for bench flashing, I used 13.7v. Turns out Galletto did not like that but rather prefered 11.7v and with that works every time.


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 14, 2024, 01:55:10 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search