Pages: [1]
Author Topic: help with 06A906032C 512kb 2000 beetle 1.8T XDF  (Read 5460 times)
vwnut8392
Sr. Member
****

Karma: +19/-7
Offline Offline

Posts: 271


« on: October 23, 2015, 04:52:56 PM »

i've been working on a definition for this ECU and could use some help. i know the maps in this ECU vary slightly from a 1024kb ECU but im trying to find everything to perform basic tuning, remove all emissions related stuff like downstream 02, SAI pump, EGR solenoid, N249 solenoid and tank vent valve. i cant seem to locate a similar well defined XDF, damos, or KP file to this ECU.
any help on this would be great, i attached my current XDF and the stock BIN file. thank guys.
« Last Edit: October 23, 2015, 05:04:49 PM by vwnut8392 » Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802



« Reply #1 on: October 24, 2015, 05:16:32 AM »

eskonf starts at 14f5d
Logged

Giving your mom a tuneup
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802



« Reply #2 on: October 24, 2015, 05:39:16 AM »

how to disable DS o2 with map locations  Wink
CDHSH - Post cat O2 heater diagnosis 14305

CDHSHE - Post cat O2 heater amplifier diagnosis 14306

CDLATV - Lambda sensor aging diagnosis (tv) in OBDII-Mode (inverse: EURO-Mode) 1430d

CDLASH - Lambda sensor aging diagnosis (SHK) in OBDII-Mode (inverse: EURO-Mode) 1430b

CDLSH - Post cat O2 sensor diagnosis 14311

CWKONLS - Vehicles with 2 installed sensors (default value 3), set to 1 14320

When setting CWKONLS CDLSH must also be configured to prevent malfunction in circuit DTC's.
should be a start
Logged

Giving your mom a tuneup
vwnut8392
Sr. Member
****

Karma: +19/-7
Offline Offline

Posts: 271


« Reply #3 on: October 24, 2015, 12:34:23 PM »

thank guys, i found a similar DAMOS and created a basic XDF last night. its posted in the definitions section on here.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802



« Reply #4 on: October 24, 2015, 12:53:14 PM »

Welcome
Logged

Giving your mom a tuneup
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601


« Reply #5 on: June 12, 2017, 09:21:20 AM »

I am looking for help to understand how to locate error classes in this file.

I have 352339 and i am trying to compare to 06a906032E damos.

Looking for ABS, Airbag and Dash because its a swap. (CLACINS for example)
Error classes should start around 014A50.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 17 queries. (Pretty URLs adds 0s, 0q)