andreqn
Newbie
Karma: +0/-3
 Offline
Posts: 17
|
 |
« on: October 25, 2015, 07:27:13 AM »
|
|
|
i made all steps for installing me7l http://www.audizine.com/forum/showthread.php/479416-****-Complete-Guide-on-How-to-Take-and-Graph-Logs-**** when i try conenct to ecu have problem when the ignition is off - the program is connect  ??i can`t understand whats heppening please help |
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #1 on: October 25, 2015, 12:13:32 PM »
|
|
|
1) Please use cut and paste from the cmd window, don't take a freaking picture of the screen.
2) the first error is a driver problem.
3) the second is either the ECU isn't powered up, there is something interfering on the k line (such as the cluster), or the baudrate is too high.
|
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
andreqn
Newbie
Karma: +0/-3
Offline
Posts: 17
|
|
« Reply #2 on: October 25, 2015, 10:22:36 PM »
|
|
|
1) Please use cut and paste from the cmd window, don't take a freaking picture of the screen.
2) the first error is a driver problem.
3) the second is either the ECU isn't powered up, there is something interfering on the k line (such as the cluster), or the baudrate is too high.
i`ll try again tomorrow thanks |
|
|
|
|
Logged
|
|
|
|
|
adam-
|
|
« Reply #3 on: October 26, 2015, 01:02:53 AM »
|
|
|
Are you using the right port? I mean, is your cable actually port 2, or have you just blindly inserted numbers?
|
|
|
|
|
Logged
|
|
|
|
andreqn
Newbie
Karma: +0/-3
Offline
Posts: 17
|
|
« Reply #4 on: October 26, 2015, 11:05:03 AM »
|
|
|
Are you using the right port? I mean, is your cable actually port 2, or have you just blindly inserted numbers?
in properties control panel for com port for the cable i use com 2 , in me7loger i use com 2 . is it right or there is another settings ....? |
|
|
|
|
Logged
|
|
|
|
andreqn
Newbie
Karma: +0/-3
Offline
Posts: 17
|
|
« Reply #5 on: October 26, 2015, 11:22:04 AM »
|
|
|
when the ignition is off the cable conect to ecu , i atache i file wich is made when ignition is off , when is on disconect
|
|
|
|
|
Logged
|
|
|
|
|
SB_GLI
|
|
« Reply #6 on: October 26, 2015, 11:28:45 AM »
|
|
|
start the car, pull the cluster fuse, attempt to log. Seems like you have some sort of interference going on that is causing failure.
|
|
|
|
|
Logged
|
|
|
|
jimmcgee5
Full Member
Karma: +7/-7
Offline
Posts: 201
|
|
« Reply #7 on: October 29, 2015, 11:11:47 AM »
|
|
|
one thing I noticed with my laptop , I could not connect it to the power in the car , IE , inverter or 12v pc power inverter , it caused too many com errors, ran it on its own battery and it was fine .
|
|
|
|
|
Logged
|
|
|
|
lkomnino
Full Member
Karma: +1/-0
Offline
Posts: 51
|
|
« Reply #8 on: March 21, 2019, 07:16:56 AM »
|
|
|
having issues on my A6 C5 too. Cant communicate with ecu, tried pulling fuse for instrument cluster (number 15, 10a) but lights on cluster still on, and no connection to ecu.
Have tried different usb ports, nothing
taken nyet's advice:
"Use VisualME7Logger instead"
|
|
|
|
« Last Edit: March 22, 2019, 01:43:32 AM by lkomnino »
|
Logged
|
|
|
|
speed69
Newbie
Karma: +1/-0
Offline
Posts: 12
|
|
« Reply #9 on: April 21, 2019, 03:31:06 PM »
|
|
|
I'mm with the same problem, only connect with ecu off.
once I turn on ignition the connection fails at the exact same time, getting error code -8. this happens using visualME7logger or ME7_Gui.
Do anyone already figured out how to solve this?
ps: in nefmoto logger it works fine while igntion is on, had some troubles but worked
|
|
|
|
|
Logged
|
|
|
|
|
Blazius
|
|
« Reply #10 on: April 21, 2019, 05:47:44 PM »
|
|
|
Set connection mode to 0x00 in the .ecu file, set samples / s to 50 in the config file and pull the instrument fuse. Start connecting when ignition on, then start car. Should work.
|
|
|
|
|
Logged
|
|
|
|
speed69
Newbie
Karma: +1/-0
Offline
Posts: 12
|
|
« Reply #11 on: April 22, 2019, 06:46:29 AM »
|
|
|
Set connection mode to 0x00 in the .ecu file, set samples / s to 50 in the config file and pull the instrument fuse. Start connecting when ignition on, then start car. Should work.
Thanks, ill try this asap |
|
|
|
|
Logged
|
|
|
|
speed69
Newbie
Karma: +1/-0
Offline
Posts: 12
|
|
« Reply #12 on: April 22, 2019, 02:28:09 PM »
|
|
|
Set connection mode to 0x00 in the .ecu file, set samples / s to 50 in the config file and pull the instrument fuse. Start connecting when ignition on, then start car. Should work.
Thanks a lot! It worked like a charm!! awesome logger and ecuxplot! |
|
|
|
|
Logged
|
|
|
|
|
Blazius
|
|
« Reply #13 on: April 23, 2019, 02:48:05 AM »
|
|
|
Thanks a lot! It worked like a charm!!
awesome logger and ecuxplot!
Nice, you are welcome. |
|
|
|
|
Logged
|
|
|
|
|
