REVO 1.8TFSI (CDHB) P0234, P0087

Pages: [1]

« previous next »

Author

Topic: REVO 1.8TFSI (CDHB) P0234, P0087 (Read 7462 times)

seppok

Newbie

Karma: +0/-0
Offline

Offline

Posts: 17

	REVO 1.8TFSI (CDHB) P0234, P0087 « on: November 17, 2015, 09:22:06 AM »

Hello,
Seat Exeo 2011 1.8TFSI (CDHB) 160hp with REVO software. After flashing 2 years ago there has always been a P0234 overboost fault code. Funny thing is that after removing it reappears at idle. Now there is also a P0087 fuel pressure fault and limp mode... Any ideas?

Fahrzeugtyp: 3R (3R - Seat Exeo (2010 >))
Scan: 01 02 03 08 09 10 15 16 17 25 37 36 45 46 4C 55 56 77

Fahrzeug-Ident.-Nr.: VSSZZZ3RZBR019462 Kilometerstand: 49630km
-------------------------------------------------------------------------------
Adresse 01: Motorelektronik (CDH) Labeldatei: Keine
Teilenummer SW: 3R0 907 115 D HW: 3R0 907 115 D
Bauteil: 1.8l R4/4V TFSI 0030
Revision: ABH06--- Seriennummer:
Codierung: 0304000C18070160
Betriebsnr.: WSC 42500 205 92131
VCID: 3064A250A31A819E2B7-8065

OVERBOOST
---------------------------------------------------------------------------
000564 - Ladedruckregelung
P0234 - 000 - Regelgrenze überschritten
Freeze Frame:
Fehlerstatus: 01100000
Fehlerpriorität: 0
Fehlerhäufigkeit: 1
Verlernzähler: 255
Kilometerstand: 49462 km
Zeitangabe: 0
Datum: 2000.00.00
Zeit: 00:03:63

Freeze Frame:
Drehzahl: 833 /min
Last: 43.1 %
Geschwindigkeit: 0.0 km/h
Temperatur: 94.0°C
Temperatur: 35.0°C
Druck: 1010.0 mbar
Spannung: 13.843 V
---------------------------------------------------------------------------

FUEL PRESSURE
---------------------------------------------------------------------------
000135 - Kraftstoffsystem (Bank 1) Rail-/Systemdruck zu niedrig
P0087 - 000 - - Warnleuchte EIN
Freeze Frame:
Fehlerstatus: 11100000
Fehlerpriorität: 0
Fehlerhäufigkeit: 1
Verlernzähler: 255
Kilometerstand: 49462 km
Zeitangabe: 0
Datum: 2000.00.00
Zeit: 00:03:63

Freeze Frame:
Drehzahl: 1392 /min
Last: 45.1 %
Geschwindigkeit: 0.0 km/h
Temperatur: 94.0°C
Temperatur: 33.0°C
Druck: 1010.0 mbar
Spannung: 13.843 V
---------------------------------------------------------------------------


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: REVO 1.8TFSI (CDHB) P0234, P0087 « Reply #1 on: November 17, 2015, 12:53:54 PM »

P0234 is actually underboost. It is mislabeled in many diagnostics tools.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

seppok

Newbie

Karma: +0/-0
Offline

Offline

Posts: 17

	Re: REVO 1.8TFSI (CDHB) P0234, P0087 « Reply #2 on: November 17, 2015, 01:49:30 PM »

Thank you, that was new! But that doesn't really explain why 1010.0 mbar is not enough at idle...


	Logged

seppok

Newbie

Karma: +0/-0
Offline

Offline

Posts: 17

	Re: REVO 1.8TFSI (CDHB) P0234, P0087 « Reply #3 on: December 29, 2015, 03:34:25 AM »

Now the car was at the dealer and they flashed the original software. No fault codes, but now the engine runs for 10 seconds and stalls. They said the ECU must be replaced. This is hard to believe because the car could be driven before the flashing...

Any ideas?


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: REVO 1.8TFSI (CDHB) P0234, P0087 « Reply #4 on: December 29, 2015, 01:45:56 PM »

Revo modify the EEPROM too. You'll need a fresh EEPROM flashed as well, and the dealer won't have done that.


	Logged

seppok

Newbie

Karma: +0/-0
Offline

Offline

Posts: 17

	Re: REVO 1.8TFSI (CDHB) P0234, P0087 « Reply #5 on: January 29, 2016, 12:46:27 AM »

The car works now with a new high pressure fuel pump and the factory software. I have a strong feeling that the faulty software has requested too high fuel pressure and that broke the pump. I don't think the newer style pump with the roller cam follower could break when the car has been driven only 49k kilometers.


	Logged

gt-innovation

Sr. Member

Karma: +60/-91
Offline

Offline

Posts: 449

	Re: REVO 1.8TFSI (CDHB) P0234, P0087 « Reply #6 on: January 29, 2016, 06:24:42 AM »

if you logged the car with that software you would see 180bar requested pressure.

The first versions of their software had always problems.But this worked in favor of other tuners


	Logged

gman86

Hero Member

Karma: +45/-128
Offline

Offline

Posts: 705

	Re: REVO 1.8TFSI (CDHB) P0234, P0087 « Reply #7 on: March 04, 2016, 06:02:15 PM »

Revo are fucking shit. I don't understand why folk use them. It must be purely marketing. Horrible, cowboy, thieving bastards.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 25, 2024, 07:49:12 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search