Pages: [1]
Author Topic: ECU defect without a reson?  (Read 5094 times)
black
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 80


« on: November 28, 2015, 06:56:45 AM »

I have an 2,7T ECU with sucking 0,75 ampere when powered up and 2,5A when starting in boot mode??

How can this happen from then to now?? Normal is 0,25A

No connection possible...  Huh

The ecu was runnig fine...  just disconnected it from car...

best regards
Logged
crackerx
Jr. Member
**

Karma: +1/-10
Offline Offline

Posts: 43


« Reply #1 on: December 22, 2015, 02:30:42 AM »

shure you do correct connection? i think you brick the ecu during incorrect connection

Logged
black
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 80


« Reply #2 on: January 04, 2016, 08:52:30 AM »

shure you do correct connection? i think you brick the ecu during incorrect connection



I have a lot of 2.7 ECUS on my table and all of them are working fine with my bench cable  Sad
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #3 on: January 04, 2016, 11:49:41 AM »

That is not normal power consumption, but you know that. Sounds bad.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
black
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 80


« Reply #4 on: January 05, 2016, 02:25:12 AM »

That is not normal power consumption, but you know that. Sounds bad.

yes...  ECU is discarded now...
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.035 seconds with 17 queries. (Pretty URLs adds 0s, 0q)