Lambda problem 1.8T

Pages: [1]

« previous next »

Author

Topic: Lambda problem 1.8T (Read 8687 times)

Twin

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Lambda problem 1.8T « on: December 08, 2015, 03:40:54 PM »

I have a VW Golf 1.8T engine code ARZ With some mods:

conical air filter AEM
Dv APR R1
Audi RS4 spark plugs (NGK PFR7Q)
Coils audi r8
Forge Intercooler
Downpipe 3 "

I started changing only the maps LDRXN LDRXNZK KFLBTS, the car was good but when you have full boost lambdas are rich 0.70 or less (I have a wideband aem where I see the AFR), if you do not get full boost or go slowly lambdas are OK

KFFDLBTS put to 0 (temporarily) but keeps going like no improvement... Huh

I only changed LDRXN LDRXNZK KFLBTS KFFDLBTS the rest is stock

The lambda values of the channel 32 with the engine at idle are -1.5% in the first cell and 0.8% in the second.

I need help to know why the car gets these lambdas so rich and if I have to change any file or change something.

What do i need to log?

Thanks!


« Last Edit: December 08, 2015, 03:59:28 PM by Twin »	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12270

	Re: Lambda problem 1.8T « Reply #1 on: December 08, 2015, 04:08:22 PM »

Please read the sticky before posting.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

Twin

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Lambda problem 1.8T « Reply #2 on: December 08, 2015, 04:31:45 PM »

Quote from: nyet on December 08, 2015, 04:08:22 PM

Please read the sticky before posting.

Sorry

I put some logs before putting KFFDLBTS to 0, as is the lambda obtained is very rich, you need a log of any particular channel?


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12270

	Re: Lambda problem 1.8T « Reply #3 on: December 08, 2015, 04:53:32 PM »

Please read the sticky.

Post ME7L logs, and post the complete csvs.


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: Lambda problem 1.8T « Reply #4 on: December 09, 2015, 12:15:42 AM »

EGT enrichment. But yeah, get ME7L and go from there.


	Logged

Twin

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Lambda problem 1.8T « Reply #5 on: December 09, 2015, 09:32:20 AM »

Quote from: adam- on December 09, 2015, 12:15:42 AM

EGT enrichment. But yeah, get ME7L and go from there.

Hi

KFFDLBTS put to 0 to see if it improved but continues to enrich

Now I have so KFLBTS:

as you can see the defendant richest lambda is 0.80, but ignores the ecu and enriches more

later i'm gonna log by using me7L, what variables do i nedd to log?


« Last Edit: December 09, 2015, 10:16:04 AM by Twin »	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: Lambda problem 1.8T « Reply #6 on: December 09, 2015, 10:31:27 AM »

AIT's? Coolant temp? Logs? There was a thread about this a month ago; the guy disabled everything to enable fueling to force 14.7 but it still enriched. Worth a search.


	Logged

Twin

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Lambda problem 1.8T « Reply #7 on: December 09, 2015, 05:10:36 PM »

I tried using the me7l, but I could not make it work, I keep trying ...

While trying to learn how to use the ME7L, I have a few logs with vagcom, during the logs, the AFR has oscillated between 10.3 - 10.7

vagcom not show failures, any ideas? Any help is welcome!

Thanks!


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12270

	Re: Lambda problem 1.8T « Reply #8 on: December 09, 2015, 07:34:16 PM »

Quote from: Twin on December 09, 2015, 05:10:36 PM

I tried using the me7l, but I could not make it work, I keep trying ...

Copy and paste the cmd.exe output (please, no MORE DAMN screen shots).


	Logged

Twin

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Lambda problem 1.8T « Reply #9 on: December 09, 2015, 09:59:11 PM »

Quote from: nyet on December 09, 2015, 07:34:16 PM

Copy and paste the cmd.exe output (please, no MORE DAMN screen shots).

Okey, what variables do i nedd to log?


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12270

	Re: Lambda problem 1.8T « Reply #10 on: December 09, 2015, 10:10:48 PM »

Quote from: Twin on December 09, 2015, 09:59:11 PM

Okey, what variables do i nedd to log?

http://files.s4wiki.com/ME7L-ecu/

sample 2.7t files here.

adjust to taste for 1.8t


	Logged

Twin

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Lambda problem 1.8T « Reply #11 on: December 09, 2015, 10:25:27 PM »

Quote from: nyet on December 09, 2015, 10:10:48 PM

http://files.s4wiki.com/ME7L-ecu/

sample 2.7t files here.

adjust to taste for 1.8t

me7l gives this error when creating a file ecu:

read 1116 map entries
mapped 198 aliases
matchOpcode(0,D74xxxxx) out of bounds
Error: getOpc(0) out of range
get_dpp_addr(1) out of bounds
written 571 definitions
written output to file


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 12:46:20 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search