Pages: [1]
Author Topic: Timing Pull - Bosch control strategy  (Read 3359 times)
vtraudt
Sr. Member
****

Karma: +4/-7
Offline Offline

Posts: 377


WWW
« on: December 12, 2015, 06:03:22 AM »

Can someone shed some light into the control strategy Bosch is using to determine 'timing pull' ignition retard dwkrz_0 etc?
What are the key input parameters used to determine timing pull?
Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #1 on: December 12, 2015, 10:59:12 AM »

Can someone shed some light into the control strategy Bosch is using to determine 'timing pull' ignition retard dwkrz_0 etc?
What are the key input parameters used to determine timing pull?

Notch filter of knock voltage, combined with time windows to guess at cyl.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
vtraudt
Sr. Member
****

Karma: +4/-7
Offline Offline

Posts: 377


WWW
« Reply #2 on: December 12, 2015, 01:15:25 PM »

The knock filter looks for frequencies and amplitudes coming from the (2?) knock sensors and then determines (together with crank position sensor) the amount of retard (and for which cylinder). Very similar to misfire (just using time crank impulses).


Anyone ever overlaid 'heavy timing pull' with 'no timing pull' knock sensor voltage curves/logs?

Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)