Pages: [1]
Author Topic: Similar Definitions for Similar ECU?  (Read 4359 times)
stickman007
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« on: December 17, 2015, 02:42:58 PM »

Hi there, 1st time post.

I haven't got around to pulling my map yet (based on VCDS 2002 Audi TT 225 8N0906018AN), just learning and researching at this point.

Am I correct to assume that all 8N0906018 ECU are similar in their definitions? My ultimate goal is just a simple SAI delete. A few 018 maps that I've looked at seems to have either 0 or 1 leading me to suspect that its the right address? Please educated me!!

Izzy
Logged
SB_GLI
Hero Member
*****

Karma: +116/-10
Offline Offline

Posts: 1022


« Reply #1 on: December 17, 2015, 07:09:14 PM »

codewords would be, but the main maps being at exactly the same address is not likely.
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1598


« Reply #2 on: December 18, 2015, 01:06:36 AM »

Out of personal experience:
The software version number is whats important.

would recommend to read your file
open it with me7check or winols and check it
try to find a well defined software version

for example there is a damos megapack with lots of stuff

there should be a fully defined 018cb and a 018j aswell

Logged
stickman007
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #3 on: December 18, 2015, 05:23:05 PM »

Thanks for the replies!

I was really hoping that all the 8N0906018 ecu would have similar definitions! I was able to compare a 018CB for sure and a few others. (fully defined - but hard to locate because all in German). I've been using WinOLS demo just to play around.

I'm having trouble pulling my current map. I've read somewhere that it is because I have APR stage 1 tune. I'm going to try to pull it with Galletto 1260 instead of using nefmoto?

I watched a few youtube video where the guy was explaining how to search for maps by looking for the 2D/3D patterns and using WinOLS possible map for EGR. Also how the hex dump can give away the axis and size of the map. Can anybody shed some light as to what I'm looking for when searching for SAI delete? So far all I know is that I need to find MSLUB and set it to 0. But since the AMU engine with the 018AN ecu is so rare, its tough to find any examples to learn from. Most ecu comparison chart don't even list the engine or the ecu.

Izzy
Logged
stickman007
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #4 on: December 18, 2015, 05:55:57 PM »

WOW...just found a gold mine for learning this stuff.

http://nefariousmotorsports.com/forum/index.php?topic=62.msg3330#msg3330
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12256


WWW
« Reply #5 on: December 18, 2015, 06:35:30 PM »

WOW...just found a gold mine for learning this stuff.

http://nefariousmotorsports.com/forum/index.php?topic=62.msg3330#msg3330

Some of that tuning guide (the pdf) is out of date; i'd treat it with a grain of salt.

the S4wiki tuning page (in my sig) is much more up to date.

The rest of the docs are great.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
stickman007
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #6 on: December 19, 2015, 02:22:43 PM »

Thanks guys!

I found that the wiki on this site was really helpful in understanding how the ecu operates for the SLS and other functions. Steep learning curve in understanding how it all comes together. Hope someday I can contribute to the knowledge rather than just taking.

Izzy
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)