smcgeorge
Newbie
Karma: +0/-0
 Offline
Posts: 19
|
 |
« on: December 18, 2015, 09:52:14 AM »
|
|
|
I have a BIN that refuses to be corrected. Stock file worked fine, didn't change a whole lot but now has uncorrectable error... meh. I would be ever so grateful if someone could correct it for me.  heres a log if you need it. |
|
|
|
|
Logged
|
|
|
|
|
adam-
|
|
« Reply #1 on: December 18, 2015, 09:58:40 AM »
|
|
|
Okay, what did you try?
I thought maybe ME7Sum was being weird so I didn't try it at first, your file corrected file in WinOLS. Then thought I'd try ME7Sum incase that wasn't working but no, it works fine. Corrected all 9 errors first time, no issues.
So, what did you do?
|
|
|
|
|
Logged
|
|
|
|
smcgeorge
Newbie
Karma: +0/-0
Offline
Posts: 19
|
|
« Reply #2 on: December 18, 2015, 10:10:31 AM »
|
|
|
I used me7sum and me7 corrector, for some reason me7 corrector gui gave me an uncorrectable error and me7 runs that checker. Maybe old version of sum? What summer did you use? Maybe post the corrected bin and version you used. Then i'll try not to bother ya anymore ha  thanks brutha |
|
|
|
|
Logged
|
|
|
|
smcgeorge
Newbie
Karma: +0/-0
Offline
Posts: 19
|
|
« Reply #3 on: December 18, 2015, 11:14:35 AM »
|
|
|
Just tried winols demo and you have to buy it to correct bins. Turdaliscious
|
|
|
|
|
Logged
|
|
|
|
|
adam-
|
|
« Reply #4 on: December 18, 2015, 11:19:06 AM »
|
|
|
Yeah, you have to pay for it. ME7Sum is free though, you need to learn how to use it though so you can do it yourself. You don't need a GUI for this shit.
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #5 on: December 18, 2015, 11:22:10 AM »
|
|
|
I have a BIN that refuses to be corrected. Stock file worked fine, didn't change a whole lot but now has uncorrectable error... meh. I would be ever so grateful if someone could correct it for me. heres a log if you need it. Step #2: Reading ROMSYS .. ** ERROR! First word is zero... corrupted bin? ** Startup section: word[0x008000]+word[0x00FFFE] @008038 Add=0x00852D CalcAdd=0x00852D ADD OK Why did you modify the first word of your file? |
|
|
|
|
Logged
|
|
|
|
smcgeorge
Newbie
Karma: +0/-0
Offline
Posts: 19
|
|
« Reply #6 on: December 18, 2015, 11:24:56 AM »
|
|
|
I didn't change any of the info on the bin except through tunerpro on individual parameters. I don't understand how it could've happened or are you being fasetious. Totally new at this.
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #7 on: December 18, 2015, 11:45:47 AM »
|
|
|
I didn't change any of the info on the bin except through tunerpro on individual parameters. I don't understand how it could've happened or are you being fasetious. Totally new at this.
Compare your file with a stock LP file, and try running the ME7Sum on the stock LP file. |
|
|
|
|
Logged
|
|
|
|
|
adam-
|
|
« Reply #8 on: December 18, 2015, 12:25:57 PM »
|
|
|
Attached is a quite guide for people.
|
|
|
|
|
Logged
|
|
|
|
|
adam-
|
|
« Reply #9 on: December 18, 2015, 12:29:16 PM »
|
|
|
Nyet, I didn't get that error with ME7Sum and WinOLS checks it fine too? But, here it is.  |
|
|
|
|
Logged
|
|
|
|
smcgeorge
Newbie
Karma: +0/-0
Offline
Posts: 19
|
|
« Reply #10 on: December 18, 2015, 02:13:32 PM »
|
|
|
ok, so checked your checked version with me7check and its good, yet the me7sum check says 1 uncorrectable error. i seriously do not want to brick. i'm using me7sum the same way i me7 check by dragging me7sum into cmd, making 1 space with bar then adding my bin.
|
|
|
|
|
Logged
|
|
|
|
smcgeorge
Newbie
Karma: +0/-0
Offline
Posts: 19
|
|
« Reply #11 on: December 18, 2015, 03:56:29 PM »
|
|
|
here is the test. me7sum on my end no likey. what version do you have?
D:\Documents and Settings\Titan>"D:\Documents and Settings\Titan\Desktop\VW GTI
Flashes\me7sum.exe" "D:\Documents and Settings\Titan\Desktop\VW GTI Flashes\LPSt
eevareeno_chked.bin"
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].
Attempting to open firmware file 'D:\Documents and Settings\Titan\Desktop\VW GTI
Flashes\LPSteevareeno_chked.bin'
Step #1: Reading ROM info ..
Searching for EPK signature...OK
Searching for ECUID table...OK
EPK : '42/1/ME7.5/120/4013.00//24B/Dst05o/240402/'
Part Number : '06A906032LP '
Engine ID : '1.8L R4/5VT '
SW Version : '0005'
HW Number : '0261207955'
SW Number : '1037366194'
Step #2: Reading ROMSYS ..
** ERROR! First word is zero... corrupted bin? **
Startup section: word[0x008000]+word[0x00FFFE]
@008038 Add=0x00852D CalcAdd=0x00852D ADD OK
Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF
@00803c Add=0x9965A3 CalcAdd=0x9965A3 ADD OK
All param page: word[0x010000]+word[0x01FFFE]
@01bed0 Add=0x00971D CalcAdd=0x00971D ADD OK
Step #3: Reading RSA signatures ..
Searching for RSA offset #0...OK
Searching for RSA offset #1...OK
Signature: @9d894-9d914
Modulus: @1699a-16a1a
Exponent: @16a1a = 3
Searching for MD5 ranges...OK
MD5 Block Offset Table @16976 [32 bytes]:
1) 0x00010002-0x00013FFE
2) 0x00014252-0x00017F4E
3) 0x00018192-0x0001FBDC
4) 0x00026A00-0x0002FFFC
EncrMD5: 0d db 9f 5a bb 6e 26 cb 8b be 16 32 a0 fe c0 ef
CalcMD5: 0d db 9f 5a bb 6e 26 cb 8b be 16 32 a0 fe c0 ef
OK
Step #4: Finding CRC table(s) ..
Searching for CRC table(s)...OK
CRC table(s) OK
Step #5: Reading Main Data Checksums ..
Searching for main data CRC pre block...missing
Searching for main data CRC/csum blocks...OK
Searching for main data CRC offsets...missing
Searching for main data checksum offsets...OK
Main Checksums:
1) 0x010002-0x013FFE CalcCSM: 0013277F
2) 0x014252-0x017F4E CalcCSM: 002C2DF7
3) 0x018192-0x01FBDC CalcCSM: 00495810
4) 0x026A00-0x02FFFC CalcCSM: 00BA4FC8
@9e0da CSM: 00BA4FC8 CalcCSM: 00BA4FC8 Main data checksum OK
Step #6: Reading Main Program Checksums ..
Searching for main program checksum..OK
ROM Checksum Block Offset Table @1fb74 [16 bytes]:
1) 0x000000-0x00FBFF CalcChk: 48CFE312
0x00FC00-0x01FFFF CalcChk: 23EDBA43 CalcCRC: E5AD9EB8 SKIPPED
2) 0x020000-0x0FFFFF
<fffe0> Chk: 02F56348 CalcChk: 02F56348 OK (i)
Step #7: Reading Multipoint Checksum Blocks ..
Searching for multipoint block descriptor #1...missing
Searching for multipoint block descriptor #2...OK
1) <1fbde> 0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK
2) <1fbee> 0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK
3) <1fbfe> 0x000000-0x003FFF Chk: 0FA0F4D5 CalcChk: 0FA0F4D5 OK
4) <1fc0e> 0x004000-0x007FFF Chk: 0F4716B3 CalcChk: 0F4716B3 OK
Multipoint #2: [66 blocks x <16> = 1056 bytes]
*** Found 70 checksums in D:\Documents and Settings\Titan\Desktop\VW GTI Flashes
\LPSteevareeno_chked.bin
*** ABORTING! 1 uncorrectable error(s) in D:\Documents and Settings\Titan\Deskto
p\VW GTI Flashes\LPSteevareeno_chked.bin! ***
D:\Documents and Settings\Titan>
|
|
|
|
|
Logged
|
|
|
|
smcgeorge
Newbie
Karma: +0/-0
Offline
Posts: 19
|
|
« Reply #12 on: December 18, 2015, 04:13:20 PM »
|
|
|
heres my orig and my modded that doesn't pass. keep getting an uncorrectable error on me7sum. me7checker accepts it tho
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #13 on: December 18, 2015, 04:37:51 PM »
|
|
|
heres my orig and my modded that doesn't pass. keep getting an uncorrectable error on me7sum. me7checker accepts it tho
1c1 < 00000000: fa00 7064 fa82 0400 fa00 1867 fa82 0c00 ..pd.......g.... --- > 00000000: 0000 7064 fa82 0400 fa00 1867 fa82 0c00 ..pd.......g.... 5396,5427c5396,5427 Why did you zero out the first byte? |
|
|
|
|
Logged
|
|
|
|
smcgeorge
Newbie
Karma: +0/-0
Offline
Posts: 19
|
|
« Reply #14 on: December 18, 2015, 04:40:31 PM »
|
|
|
Don't know how that happened.? Just used tunerpro to modify then saved. How do i fix it?
|
|
|
|
|
Logged
|
|
|
|
|
