my ECU part number, will Nefmoto be able to connect and work with it?

Pages: [1]

« previous next »

Author

Topic: my ECU part number, will Nefmoto be able to connect and work with it? (Read 3363 times)

Otrabajo

Newbie

Karma: +0/-0
Offline

Offline

Posts: 16

	my ECU part number, will Nefmoto be able to connect and work with it? « on: January 02, 2016, 08:57:18 AM »

folks,

my Audi A4B6 3.0L ASN engine is running the following ECU:

VAG NUMBER:    8E0 909 559
Component:    3.0L V6/5V 0003
Soft coding:    0011501
ShopL       Imp: 000 WSC 63351

i've been trying to connect with Nefmoto to the ECU by using a Ross Tech HEX-CAN cable with direct USB drivers, but no success. Nefmoto says it cannot echo / find the cable. But the cable is fully operational with VCDS software.

Can you guys tell me Nefmoto is compatible with my ECU? if not, what are the alternatives for connecting to my ECU and doing flash read and writes?

thank you in advance
Otrabajo


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: my ECU part number, will Nefmoto be able to connect and work with it? « Reply #1 on: January 02, 2016, 09:05:33 AM »

Put your cable into dumb mode in the vcds setting. this should make it work with nefmoto if your vcds is genuine cable.

google is your friend


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: my ECU part number, will Nefmoto be able to connect and work with it? « Reply #2 on: January 02, 2016, 10:18:18 AM »

Quote:

"You can also use (recent) VCDS (Ross-tech) cables with Nefmoto, but you may have to disable "intelligent mode" in the VCDS setup dialog"

http://s4wiki.com/wiki/Tuning#Flashing_utilities


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

Otrabajo

Newbie

Karma: +0/-0
Offline

Offline

Posts: 16

	Re: my ECU part number, will Nefmoto be able to connect and work with it? « Reply #3 on: January 03, 2016, 01:19:05 PM »

sorry guys, i've been reading a lot before posting on this forum.
And yes, my Ross HEX-CAN cable "intelligent mode" is disabled before starting netmoto, but no way, i'm unable to connect to the ECU using Nefmoto although VCDS software works properly, for instance clearing all DTC errors.

I'll give a try to Galleto software.

thank you anyway.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 11:50:09 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search