Pages: [1]
Author Topic: Cluster for Using 2.7 BEL harness on APB engine  (Read 3393 times)
Cadensdad14
Full Member
***

Karma: +8/-1
Offline Offline

Posts: 134


« on: January 10, 2016, 04:29:51 PM »

I have a bit of a unique project in the works.  I have a 01 a4 I'm swapping a 2.7 into.  I understand the difficulties and have worked through most.  I have an Allroad BEL harness I'm intending to put on the engine with a R box ecu.  What I haven't covered yet is what issues I will run into getting it to connect with the cluster and also what other accessories will be affected.  I know I will have to defeat the immobilizer. Will harness for my current cluster connect to the new ecu? 
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #1 on: January 14, 2016, 02:02:59 PM »

I'd get an APB harness and run ME7.1 not BEL+7.1.1

Much less hassle.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
ddillenger
Moderator
Hero Member
*****

Karma: +638/-21
Offline Offline

Posts: 5640


« Reply #2 on: January 14, 2016, 07:21:51 PM »

The APB harness is plug and play.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 16 queries. (Pretty URLs adds 0s, 0q)